dimoniche/Moyka
1
0
Fork 0
mirror of https://github.com/dimoniche/Moyka.git synced 2026-01-30 09:53:31 +03:00
Code Issues Packages Projects Releases Wiki Activity
Moyka/OS/uc/tcpip/Source/net_tcp.h
dimoniche f74fdcceac первый коммит 
первый коммит
2019-05-27 23:42:26 +03:00

2137 lines
123 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
*********************************************************************************************************
* uC/TCP-IP
* The Embedded TCP/IP Suite
*
* (c) Copyright 2003-2007; Micrium, Inc.; Weston, FL
*
* All rights reserved. Protected by international copyright laws.
*
* uC/TCP-IP is provided in source form for FREE evaluation, for educational
* use or peaceful research. If you plan on using uC/TCP-IP in a commercial
* product you need to contact Micrium to properly license its use in your
* product. We provide ALL the source code for your convenience and to help
* you experience uC/TCP-IP. The fact that the source code is provided does
* NOT mean that you can use it without paying a licensing fee.
*
* Knowledge of the source code may NOT be used to develop a similar product.
*
* Please help us continue to provide the Embedded community with the finest
* software available. Your honesty is greatly appreciated.
*********************************************************************************************************
*/
/*
*********************************************************************************************************
*
* NETWORK TCP LAYER
* (TRANSMISSION CONTROL PROTOCOL)
*
* Filename : net_tcp.h
* Version : V1.89
* Programmer(s) : ITJ
*********************************************************************************************************
* Note(s) : (1) Supports Transmission Control Protocol as described in RFC #793 with the following
* restrictions/constraints :
*
* (a) TCP Security & Precedence NOT supported RFC # 793, Section 3.6
*
* (b) TCP Urgent Data NOT supported RFC # 793, Section 3.7
* 'The Communication of
* Urgent Information'
*
* (c) The following TCP options NOT supported :
*
* (1) Window Scale RFC #1072, Section 2
* RFC #1323, Section 2
* (2) Selective Acknowledgement (SACK) RFC #1072, Section 3
* RFC #2018
* RFC #2883
* (3) TCP Echo RFC #1072, Section 4
* (4) Timestamp RFC #1323, Section 3.2
* (5) Protection Against Wrapped Sequences (PAWS) RFC #1323, Section 4
*
* (d) #### IP-Options-to-TCP-Connection RFC #1122, Section 4.2.3.8
* Handling NOT supported
*
* (e) #### ICMP-Error-Message-to-TCP-Connection RFC #1122, Section 4.2.3.9
* Handling NOT currently supported
*
* (2) TCP Layer assumes/requires Network Socket Layer (see 'net_sock.h MODULE Note #1a2').
*********************************************************************************************************
*/
/*$PAGE*/
/*
*********************************************************************************************************
* MODULE
*
* Note(s) : (1) TCP module is NOT required for UDP-to-Application API configuration.
*
* See also 'net_cfg.h TRANSPORT LAYER CONFIGURATION'
* & 'net_cfg.h USER DATAGRAM PROTOCOL LAYER CONFIGURATION'.
*
* See also 'net_tcp.h Note #2'.
*
* (2) The following TCP-module-present configuration value MUST be pre-#define'd in
* 'net_cfg_net.h' PRIOR to all other network modules that require TCP Layer
* Configuration (see 'net_cfg_net.h TCP LAYER CONFIGURATION Note #2b') :
*
* NET_TCP_MODULE_PRESENT
*********************************************************************************************************
*/
#ifdef NET_TCP_MODULE_PRESENT /* See Note #2. */
/*
*********************************************************************************************************
* EXTERNS
*********************************************************************************************************
*/
#ifdef NET_TCP_MODULE
#define NET_TCP_EXT
#else
#define NET_TCP_EXT extern
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* DEFINES
*********************************************************************************************************
*/
/*
*********************************************************************************************************
* TCP HEADER DEFINES
*
* Note(s) : (1) The following TCP value MUST be pre-#define'd in 'net_def.h' PRIOR to 'net_buf.h' so that
* the Network Buffer Module can configure maximum buffer header size (see 'net_def.h TCP
* LAYER DEFINES' & 'net_buf.h NETWORK BUFFER INDEX & SIZE DEFINES Note #1') :
*
* (a) NET_TCP_HDR_SIZE_MAX 60 (NET_TCP_HDR_LEN_MAX
* * NET_TCP_HDR_LEN_WORD_SIZE)
*
* (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b').
*********************************************************************************************************
*/
#define NET_TCP_HDR_LEN_MASK 0xF000
#define NET_TCP_HDR_LEN_SHIFT 12
#define NET_TCP_HDR_LEN_NONE 0
#define NET_TCP_HDR_LEN_MIN 5
#define NET_TCP_HDR_LEN_MAX 15
#define NET_TCP_HDR_LEN_WORD_SIZE CPU_WORD_SIZE_32
#define NET_TCP_HDR_SIZE_MIN (NET_TCP_HDR_LEN_MIN * NET_TCP_HDR_LEN_WORD_SIZE)
#if 0 /* See Note #1a. */
#define NET_TCP_HDR_SIZE_MAX (NET_TCP_HDR_LEN_MAX * NET_TCP_HDR_LEN_WORD_SIZE)
#endif
#define NET_TCP_HDR_SIZE_TOT_MIN (NET_IP_HDR_SIZE_TOT_MIN + NET_TCP_HDR_SIZE_MIN)
#define NET_TCP_HDR_SIZE_TOT_MAX (NET_IP_HDR_SIZE_TOT_MAX + NET_TCP_HDR_SIZE_MAX)
#define NET_TCP_PSEUDO_HDR_SIZE 12 /* Sizeof(NET_TCP_PSEUDO_HDR) [see 'TCP PSEUDO-HEADER'].*/
#define NET_TCP_PORT_NBR_RESERVED NET_PORT_NBR_RESERVED
#define NET_TCP_PORT_NBR_NONE NET_TCP_PORT_NBR_RESERVED
#define NET_TCP_HDR_URG_PTR_NONE 0x0000 /* See Note #2. */
/*$PAGE*/
/*
*********************************************************************************************************
* TCP HEADER FLAG DEFINES
*
* Note(s) : (1) See 'TCP HEADER Note #2' for flag fields.
*
* (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b').
*********************************************************************************************************
*/
#define NET_TCP_HDR_FLAG_MASK 0x0FFF
#define NET_TCP_HDR_FLAG_NONE DEF_BIT_NONE
#define NET_TCP_HDR_FLAG_RESERVED 0x0FE0 /* MUST be '0'. */
#define NET_TCP_HDR_FLAG_URGENT DEF_BIT_05 /* See Note #2. */
#define NET_TCP_HDR_FLAG_ACK DEF_BIT_04
#define NET_TCP_HDR_FLAG_PUSH DEF_BIT_03
#define NET_TCP_HDR_FLAG_RESET DEF_BIT_02
#define NET_TCP_HDR_FLAG_SYNC DEF_BIT_01
#define NET_TCP_HDR_FLAG_FIN DEF_BIT_00
#define NET_TCP_HDR_FLAG_CLOSE NET_TCP_HDR_FLAG_FIN
/*
*********************************************************************************************************
* TCP FLAG DEFINES
*********************************************************************************************************
*/
/* ------------------ NET TCP FLAGS ------------------- */
#define NET_TCP_FLAG_NONE DEF_BIT_NONE
#define NET_TCP_FLAG_USED DEF_BIT_00 /* TCP conn cur used; i.e. NOT in free TCP conn pool. */
/* ------------------ TCP TX FLAGS ------------------- */
/* TCP tx flags copied from TCP hdr flags. */
#define NET_TCP_FLAG_TX_FIN NET_TCP_HDR_FLAG_FIN
#define NET_TCP_FLAG_TX_CLOSE NET_TCP_FLAG_TX_FIN
#define NET_TCP_FLAG_TX_SYNC NET_TCP_HDR_FLAG_SYNC
#define NET_TCP_FLAG_TX_RESET NET_TCP_HDR_FLAG_RESET
#define NET_TCP_FLAG_TX_PUSH NET_TCP_HDR_FLAG_PUSH
#define NET_TCP_FLAG_TX_ACK NET_TCP_HDR_FLAG_ACK
#define NET_TCP_FLAG_TX_URGENT NET_TCP_HDR_FLAG_URGENT
#define NET_TCP_FLAG_TX_BLOCK DEF_BIT_07
/* ------------------ TCP RX FLAGS ------------------- */
#define NET_TCP_FLAG_RX_DATA_PEEK DEF_BIT_08
#define NET_TCP_FLAG_RX_BLOCK DEF_BIT_15
/*$PAGE*/
/*
*********************************************************************************************************
* TCP TYPE DEFINES
*
* Note(s) : (1) NET_TCP_TYPE_??? #define values specifically chosen as ASCII representations of the TCP
* types. Memory displays of TCP types will display the TCP TYPE with the chosen ASCII name.
*********************************************************************************************************
*/
/* ------------------ NET TCP TYPES ------------------- */
#if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG)
#define NET_TCP_TYPE_NONE 0x4E4F4E45 /* "NONE" in ASCII. */
#define NET_TCP_TYPE_CONN 0x54435020 /* "TCP " in ASCII. */
#else
#if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32)
#define NET_TCP_TYPE_NONE 0x454E4F4E /* "NONE" in ASCII. */
#define NET_TCP_TYPE_CONN 0x20504354 /* "TCP " in ASCII. */
#elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16)
#define NET_TCP_TYPE_NONE 0x4F4E454E /* "NONE" in ASCII. */
#define NET_TCP_TYPE_CONN 0x43542050 /* "TCP " in ASCII. */
#else /* Dflt CPU_WORD_SIZE_08. */
#define NET_TCP_TYPE_NONE 0x4E4F4E45 /* "NONE" in ASCII. */
#define NET_TCP_TYPE_CONN 0x54435020 /* "TCP " in ASCII. */
#endif
#endif
/*
*********************************************************************************************************
* TCP SEQUENCE NUMBER DEFINES
*
* Note(s) : (1) TCP initial transmit sequence number is incremented by a fixed value, preferably a large
* prime value or a large value with multiple unique prime factors.
*
* (a) One reasonable TCP initial transmit sequence number increment value example :
*
* 65527 = 37 * 23 * 11 * 7
*
*
* #### NET_TCP_TX_SEQ_NBR_CTR_INC could be developer-configured in 'net_cfg.h'.
*
* See also 'NET_TCP_TX_GET_SEQ_NBR() Notes #1b2 & #1c2'.
*********************************************************************************************************
*/
#define NET_TCP_SEQ_NBR_NONE 0
#define NET_TCP_ACK_NBR_NONE NET_TCP_SEQ_NBR_NONE
#define NET_TCP_TX_SEQ_NBR_CTR_INC 65527uL /* See Note #1. */
#define NET_TCP_ACK_NBR_DUP_WIN_SIZE_SCALE 4
/*$PAGE*/
/*
*********************************************************************************************************
* TCP DATA/TOTAL LENGTH & MAXIMUM TRANSMISSION UNIT (MTU) DEFINES
*
* Note(s) : (1) (a) TCP total length #define's (NET_TCP_TOT_LEN) relate to the total size of a complete
* TCP packet, including the packet's TCP header. Note that a complete TCP packet MAY
* be fragmented in multiple Internet Protocol packets.
*
* (b) TCP data length #define's (NET_TCP_DATA_LEN) relate to the data size of a complete
* TCP packet, equal to the total TCP packet length minus its TCP header size. Note
* that a complete TCP packet MAY be fragmented in multiple Internet Protocol packets.
*
* (c) TCP MTU #define's (NET_TCP_MTU) relate to the data size for any single, non-fragmented
* TCP packet, equal to a packet's Internet Protocol MTU minus its TCP header size.
*
* (2) The 'NET_TCP_MTU_NET_RSRC' pre-processor 'else'-conditional code will never be compiled/
* linked since 'net_buf.h' ensures that at least one of the two configuration constants
* (NET_BUF_CFG_NBR_SMALL or NET_BUF_CFG_NBR_LARGE) will be configured with a value greater
* than zero (see 'net_buf.h CONFIGURATION ERRORS'). The 'else'-conditional code is
* included for completeness & as an extra precaution in case 'net_buf.h' is incorrectly
* modified.
*********************************************************************************************************
*/
/* See Notes #1a & #1b. */
#define NET_TCP_DATA_LEN_MIN 0
#define NET_TCP_TOT_LEN_MIN (NET_TCP_HDR_SIZE_MIN + NET_TCP_DATA_LEN_MIN)
#define NET_TCP_TOT_LEN_MAX (NET_IP_TOT_LEN_MAX - NET_IP_HDR_SIZE_MIN )
#define NET_TCP_DATA_LEN_MAX (NET_TCP_TOT_LEN_MAX - NET_TCP_HDR_SIZE_MIN)
/* See Note #1c. */
#define NET_TCP_MTU_MIN (NET_IP_MTU_MIN - NET_TCP_HDR_SIZE_MAX)
#define NET_TCP_MTU_MAX (NET_IP_MTU_MAX - NET_TCP_HDR_SIZE_MIN)
#define NET_TCP_MTU NET_TCP_MTU_MIN
#define NET_TCP_MTU_NET_RSRC NET_TCP_MTU_MAX
#if (NET_BUF_CFG_NBR_LARGE > 0)
#if ((NET_BUF_CFG_DATA_SIZE_LARGE - NET_BUF_DATA_SIZE_MIN) < NET_TCP_MTU_NET_RSRC)
#undef NET_TCP_MTU_NET_RSRC
#define NET_TCP_MTU_NET_RSRC (NET_BUF_CFG_DATA_SIZE_LARGE - NET_BUF_DATA_SIZE_MIN)
#endif
#elif (NET_BUF_CFG_NBR_SMALL > 0)
#if ((NET_BUF_CFG_DATA_SIZE_SMALL - NET_BUF_DATA_SIZE_MIN) < NET_TCP_MTU_NET_RSRC)
#undef NET_TCP_MTU_NET_RSRC
#define NET_TCP_MTU_NET_RSRC (NET_BUF_CFG_DATA_SIZE_SMALL - NET_BUF_DATA_SIZE_MIN)
#endif
#else /* See Note #2. */
#error "NET_BUF_CFG_NBR_SMALL illegally #defined in 'net_buf.h' "
#error "NET_BUF_CFG_NBR_LARGE illegally #defined in 'net_buf.h' "
#error " [See 'net_buf.h CONFIGURATION ERRORS']"
#endif
#define NET_TCP_MTU_ACTUAL (DEF_MIN(NET_TCP_MTU, NET_TCP_MTU_NET_RSRC))
/*$PAGE*/
/*
*********************************************************************************************************
* TCP SEGMENT SIZE DEFINES
*
* Note(s) : (1) (a) RFC # 879, Section 3 states that the TCP Maximum Segment Size "counts only
* data octets in the segment, ... not the TCP header or the IP header".
*
* (b) RFC #1122, Section 4.2.2.6 requires that ... :
*
* (1) "The MSS value to be sent in an MSS option must be less than or equal to
*
* (A) MMS_R - 20
*
* where MMS_R is the maximum size for a transport-layer message that can
* be received."
*
* (2) "If an MSS option is not received at connection setup, TCP MUST assume a
* default send MSS of 536 (576 - 40)."
*
* See also 'net_ip.h IP DATA/TOTAL LENGTH & MAXIMUM TRANSMISSION UNIT (MTU) DEFINES
* Note #1'.
*********************************************************************************************************
*/
/* See Note #1. */
#define NET_TCP_MAX_SEG_SIZE_DFLT_BASE NET_IP_MAX_DATAGRAM_SIZE_DFLT
#define NET_TCP_MAX_SEG_SIZE_DFLT (NET_TCP_MAX_SEG_SIZE_DFLT_BASE - NET_IP_HDR_SIZE_MIN - NET_TCP_HDR_SIZE_MIN)
#define NET_TCP_MAX_SEG_SIZE_DFLT_RX NET_TCP_MTU_NET_RSRC /* See Note #1b1. */
#define NET_TCP_MAX_SEG_SIZE_DFLT_TX NET_TCP_MAX_SEG_SIZE_DFLT /* See Note #1b2. */
#define NET_TCP_MAX_SEG_SIZE_NONE 0
#define NET_TCP_MAX_SEG_SIZE_MIN NET_TCP_MAX_SEG_SIZE_DFLT
#define NET_TCP_MAX_SEG_SIZE_MAX NET_TCP_DATA_LEN_MAX
#define NET_TCP_SEG_LEN_MIN NET_TCP_DATA_LEN_MIN
#define NET_TCP_SEG_LEN_MAX NET_TCP_DATA_LEN_MAX
#define NET_TCP_SEG_LEN_SYNC 1
#define NET_TCP_SEG_LEN_FIN 1
#define NET_TCP_SEG_LEN_CLOSE NET_TCP_SEG_LEN_FIN
#define NET_TCP_SEG_LEN_ACK 0
#define NET_TCP_SEG_LEN_RESET 0
#define NET_TCP_SEG_LEN_PROBE 0
#define NET_TCP_DATA_LEN_TX_SYNC 0
#define NET_TCP_DATA_LEN_TX_FIN 0
#define NET_TCP_DATA_LEN_TX_CLOSE NET_TCP_DATA_LEN_TX_FIN
#define NET_TCP_DATA_LEN_TX_ACK 0
#define NET_TCP_DATA_LEN_TX_PROBE_NO_DATA 0
#define NET_TCP_DATA_LEN_TX_PROBE_DATA 1
#define NET_TCP_DATA_LEN_TX_RESET 0
#define NET_TCP_TX_PROBE_DATA 0x00
/*
*********************************************************************************************************
* TCP WINDOW SIZE DEFINES
*
* Note(s) : (1) Although NO RFC specifies the absolute minimum TCP connection window size value allowed,
* RFC #793, Section 3.7 'Data Communication : Managing the Window' states that for "the
* window ... there is an assumption that this is related to the currently available data
* buffer space available for this connection".
*********************************************************************************************************
*/
#define NET_TCP_WIN_SIZE_NONE 0
#define NET_TCP_WIN_SIZE_MIN NET_TCP_MTU_NET_RSRC /* See Note #1. */
#define NET_TCP_WIN_SIZE_MAX DEF_INT_16U_MAX_VAL
/*$PAGE*/
/*
*********************************************************************************************************
* TCP HEADER OPTIONS DEFINES
*
* Note(s) : (1) See the following RFC's for TCP options summary :
*
* (a) RFC # 793, Section 3.1 'Header Format : Options'
* (b) RFC #1122; Sections 4.2.2.5, 4.2.2.6
*
* (2) TCP option types are coded in the first octet for each TCP option as follows :
*
* --------
* | TYPE |
* --------
*
* The TCP option type value determines the TCP option format :
*
* (a) The following TCP option types are single-octet TCP options -- i.e. the option type
* octet is the ONLY octet for the TCP option.
*
* (1) TYPE = 0 End of Options List
* (2) TYPE = 1 No Operation
*
*
* (b) All other TCP options MUST be multi-octet TCP options (see RFC #1122, Section 4.2.2.5) :
*
* ------------------------------
* | TYPE | LEN | TCP OPT |
* ------------------------------
*
* where
* TYPE Indicates the specific TCP option type
* LEN Indicates the total TCP option length, in octets, including
* the option type & the option length octets
* TCP OPT Additional TCP option octets, if any, that contain the remaining
* TCP option information
*
* The following TCP option types are multi-octet TCP options where the option's second
* octet specify the total TCP option length, in octets, including the option type & the
* option length octets :
*
* (1) TYPE = 2 Maximum Segment Size See RFC #793, Section 3.1 'Header Format :
* Options : Maximum Segment Size';
* RFC #1122, Section 4.2.2.6;
* RFC # 879, Section 3
*
* (2) TYPE = 3 Window Scale See 'net_tcp.h Note #1c1'
* (3) TYPE = 4 SACK Allowed See 'net_tcp.h Note #1c2'
* (4) TYPE = 5 SACK Option See 'net_tcp.h Note #1c2'
* (5) TYPE = 6 Echo Request See 'net_tcp.h Note #1c3'
* (6) TYPE = 7 Echo Reply See 'net_tcp.h Note #1c3'
* (7) TYPE = 8 Timestamp See 'net_tcp.h Note #1c4'
*
* (3) TCP header allows for a maximum option list length of 40 octets :
*
* NET_TCP_HDR_OPT_SIZE_MAX = NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN
*
* = 60 - 20
*
* = 40
*
* (4) Data type MUST be globally declared PRIOR to certain dependent #define's.
*********************************************************************************************************
*/
/*$PAGE*/
#define NET_TCP_HDR_OPT_END_LIST 0
#define NET_TCP_HDR_OPT_NOP 1
#define NET_TCP_HDR_OPT_MAX_SEG_SIZE 2
#define NET_TCP_HDR_OPT_WIN_SCALE 3
#define NET_TCP_HDR_OPT_SACK_PERMIT 4
#define NET_TCP_HDR_OPT_SACK 5
#define NET_TCP_HDR_OPT_ECHO_REQ 6
#define NET_TCP_HDR_OPT_ECHO_REPLY 7
#define NET_TCP_HDR_OPT_TS 8
#define NET_TCP_HDR_OPT_PAD NET_TCP_HDR_OPT_END_LIST
#define NET_TCP_HDR_OPT_LEN_END_LIST 1
#define NET_TCP_HDR_OPT_LEN_NOP 1
#define NET_TCP_HDR_OPT_LEN_MAX_SEG_SIZE 4
#define NET_TCP_HDR_OPT_LEN_WIN_SCALE 3
#define NET_TCP_HDR_OPT_LEN_SACK_PERMIT 2
#define NET_TCP_HDR_OPT_LEN_ECHO_REQ 6
#define NET_TCP_HDR_OPT_LEN_ECHO_REPLY 6
#define NET_TCP_HDR_OPT_LEN_TS 10
#define NET_TCP_HDR_OPT_LEN_SACK_MIN 6
#define NET_TCP_HDR_OPT_LEN_SACK_MAX 38
#define NET_TCP_HDR_OPT_LEN_MIN 1
#define NET_TCP_HDR_OPT_LEN_MIN_LEN 2
#define NET_TCP_HDR_OPT_LEN_MAX 38
typedef CPU_INT32U NET_TCP_OPT_SIZE; /* TCP opt size data type (see Note #4). */
#define NET_TCP_HDR_OPT_SIZE_WORD (sizeof(NET_TCP_OPT_SIZE))
#define NET_TCP_HDR_OPT_SIZE_MAX (NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN)
#define NET_TCP_HDR_OPT_NBR_MIN 0
#define NET_TCP_HDR_OPT_NBR_MAX (NET_TCP_HDR_OPT_SIZE_MAX / NET_TCP_HDR_OPT_SIZE_WORD)
#define NET_TCP_HDR_OPT_IX NET_TCP_HDR_SIZE_MIN
/*$PAGE*/
/*
*********************************************************************************************************
* TCP OPTION CONFIGURATION TYPE DEFINES
*
* Note(s) : (1) NET_TCP_OPT_CFG_TYPE_??? #define values specifically chosen as ASCII representations of
* the TCP option configuration types. Memory displays of TCP option configuration buffers
* will display the TCP option configuration TYPEs with their chosen ASCII names.
*********************************************************************************************************
*/
/* ---------------- TCP OPT CFG TYPES ----------------- */
#if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG)
#define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45 /* "NONE" in ASCII. */
#define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320 /* "MSS " in ASCII. */
#define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20 /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */
#define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50 /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */
#define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434B /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */
#define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551 /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */
#define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484F /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */
#define NET_TCP_OPT_CFG_TYPE_TS 0x54532020 /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */
#else
#if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32)
#define NET_TCP_OPT_CFG_TYPE_NONE 0x454E4F4E /* "NONE" in ASCII. */
#define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x2053534D /* "MSS " in ASCII. */
#define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x204E4957 /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */
#define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x504B4353 /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */
#define NET_TCP_OPT_CFG_TYPE_SACK 0x4B434153 /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */
#define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x51455245 /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */
#define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4F484345 /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */
#define NET_TCP_OPT_CFG_TYPE_TS 0x20205354 /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */
#elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16)
#define NET_TCP_OPT_CFG_TYPE_NONE 0x4F4E454E /* "NONE" in ASCII. */
#define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x534D2053 /* "MSS " in ASCII. */
#define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x4957204E /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */
#define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x4353504B /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */
#define NET_TCP_OPT_CFG_TYPE_SACK 0x41534B43 /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */
#define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x52455145 /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */
#define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x43454F48 /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */
#define NET_TCP_OPT_CFG_TYPE_TS 0x53542020 /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */
#else /* Dflt CPU_WORD_SIZE_08. */
#define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45 /* "NONE" in ASCII. */
#define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320 /* "MSS " in ASCII. */
#define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20 /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */
#define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50 /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */
#define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434B /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */
#define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551 /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */
#define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484F /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */
#define NET_TCP_OPT_CFG_TYPE_TS 0x54532020 /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */
#endif
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* TCP CONNECTION DEFINES
*********************************************************************************************************
*/
#define NET_TCP_CONN_ID_MIN 0
#define NET_TCP_CONN_ID_MAX (NET_TCP_CFG_NBR_CONN - 1)
#define NET_TCP_CONN_ID_NONE (NET_TCP_CONN_ID_MIN - 1)
/*
*********************************************************************************************************
* TCP CONNECTION TIMEOUT DEFINES
*
* Note(s) : (1) (a) (1) RFC #1122, Section 4.2.2.13 'DISCUSSION' states that "the graceful close algorithm
* of TCP requires that the connection state remain defined on (at least) one end of
* the connection, for a timeout period of 2xMSL ... During this period, the (remote
* socket, local socket) pair that defines the connection is busy and cannot be reused".
*
* (2) The following sections reiterate that the TIME-WAIT state timeout scalar is two
* maximum segment lifetimes (2 MSL) :
*
* (A) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES :
* Check Sequence Number : TIME-WAIT STATE'
* (B) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES :
* Check FIN Bit : TIME-WAIT STATE'
*
* (b) (1) RFC #793, Section 3.3 'Sequence Numbers : Knowing When to Keep Quiet' states that
* "the Maximum Segment Lifetime (MSL) is ... to be 2 minutes. This is an engineering
* choice, and may be changed if experience indicates it is desirable to do so".
*
* (2) Microsoft Corporation's Windows XP defaults MSL to 15 seconds.
*********************************************************************************************************
*/
/* Max seg timeout (see Note #1b). */
#define NET_TCP_CONN_TIMEOUT_MAX_SEG_MIN_SEC ( 0L) /* Max seg timeout min = 0 seconds */
#define NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC ( 2L * 60L) /* Max seg timeout max = 2 minutes */
#define NET_TCP_CONN_TIMEOUT_MAX_SEG_DFLT_SEC ( 15L) /* Max seg timeout dflt = 15 seconds */
#define NET_TCP_CONN_TIMEOUT_MAX_SEG_SCALAR 2 /* Max seg timeout scalar (see Note #1a). */
#define NET_TCP_CONN_TIMEOUT_CONN_DFLT_SEC (120L * 60L) /* Dflt conn timeout = 120 minutes */
#define NET_TCP_CONN_TIMEOUT_USER_DFLT_SEC ( 30L * 60L) /* Dflt user timeout = 30 minutes */
/*$PAGE*/
/*
*********************************************************************************************************
* TCP CONNECTION STATES
*
* Note(s) : (1) See the following RFC's for TCP state machine summary :
*
* (a) RFC # 793; Sections 3.2, 3.4, 3.5, 3.9
* (b) RFC #1122; Sections 4.2.2.8, 4.2.2.10, 4.2.2.11, 4.2.2.13, 4.2.2.18, 4.2.2.20
*
* (2) (a) #### Additional closing-data-available state used for closing connections to allow the
* application layer to receive any remaining data.
*
* See also 'net_tcp.c NetTCP_RxPktConnHandlerFinWait1() Note #2f5A2',
* 'net_tcp.c NetTCP_RxPktConnHandlerFinWait2() Note #2f5B',
* 'net_tcp.c NetTCP_RxPktConnHandlerClosing() Note #2d2B2a1B',
* & 'net_tcp.c NetTCP_RxPktConnHandlerLastAck() Note #2d2A1b'.
*********************************************************************************************************
*/
#define NET_TCP_CONN_STATE_NONE 0
#define NET_TCP_CONN_STATE_FREE 1
#define NET_TCP_CONN_STATE_CLOSED 10
#define NET_TCP_CONN_STATE_LISTEN 20
#define NET_TCP_CONN_STATE_SYNC_RXD 30
#define NET_TCP_CONN_STATE_SYNC_RXD_PASSIVE 31
#define NET_TCP_CONN_STATE_SYNC_RXD_ACTIVE 32
#define NET_TCP_CONN_STATE_SYNC_TXD 35
#define NET_TCP_CONN_STATE_CONN 40
#define NET_TCP_CONN_STATE_FIN_WAIT_1 50
#define NET_TCP_CONN_STATE_FIN_WAIT_2 51
#define NET_TCP_CONN_STATE_CLOSING 52
#define NET_TCP_CONN_STATE_TIME_WAIT 53
#define NET_TCP_CONN_STATE_CLOSE_WAIT 55
#define NET_TCP_CONN_STATE_LAST_ACK 56
#define NET_TCP_CONN_STATE_CLOSING_DATA_AVAIL 59 /* See Note #2a. */
/*
*********************************************************************************************************
* TCP CONNECTION QUEUE STATES
*********************************************************************************************************
*/
#define NET_TCP_RX_Q_STATE_NONE 0
#define NET_TCP_RX_Q_STATE_CLOSED 100
#define NET_TCP_RX_Q_STATE_CONN_CLOSED 110
#define NET_TCP_RX_Q_STATE_CONN_CLOSING 111
#define NET_TCP_RX_Q_STATE_CONN_SYNC 120
#define NET_TCP_RX_Q_STATE_CONN 121
#define NET_TCP_TX_Q_STATE_NONE 0
#define NET_TCP_TX_Q_STATE_CLOSED 200
#define NET_TCP_TX_Q_STATE_CONN_CLOSED 210
#define NET_TCP_TX_Q_STATE_CONN_CLOSING 211
#define NET_TCP_TX_Q_STATE_CONN_SYNC 220
#define NET_TCP_TX_Q_STATE_CONN 221
#define NET_TCP_TX_Q_STATE_CONN_SUSPEND 225
/*$PAGE*/
/*
*********************************************************************************************************
* TCP CONNECTION CODE DEFINES
*********************************************************************************************************
*/
#define NET_TCP_CONN_RX_SEQ_NONE 10 /* NO rx'd TCP conn seq. */
#define NET_TCP_CONN_RX_SEQ_SYNC_INVALID 11 /* Invalid rx'd TCP conn sync. */
#define NET_TCP_CONN_RX_SEQ_SYNC 12 /* Valid rx'd TCP conn sync. */
#define NET_TCP_CONN_RX_SEQ_INVALID 15 /* Invalid rx'd TCP conn seq. */
#define NET_TCP_CONN_RX_SEQ_VALID 16 /* Valid rx'd TCP conn seq. */
#define NET_TCP_CONN_RX_ACK_NONE 20 /* NO rx'd TCP conn ack. */
#define NET_TCP_CONN_RX_ACK_INVALID 21 /* Invalid rx'd TCP conn ack. */
#define NET_TCP_CONN_RX_ACK_VALID 22 /* Valid rx'd TCP conn ack. */
#define NET_TCP_CONN_RX_ACK_DUP 23 /* Duplicate rx'd TCP conn ack. */
#define NET_TCP_CONN_RX_ACK_PREV 24 /* Prev'ly rx'd TCP conn ack. */
#define NET_TCP_CONN_RX_RESET_NONE 30 /* NO rx'd TCP conn reset. */
#define NET_TCP_CONN_RX_RESET_INVALID 31 /* Invalid rx'd TCP conn reset. */
#define NET_TCP_CONN_RX_RESET_VALID 32 /* Valid rx'd TCP conn reset. */
#define NET_TCP_CONN_RX_WIN_RESET 50 /* Reset cur rx win size. */
#define NET_TCP_CONN_RX_WIN_SET 51 /* Set cur rx win size. */
#define NET_TCP_CONN_RX_WIN_INC 52 /* Inc cur rx win size. */
#define NET_TCP_CONN_RX_WIN_DEC 53 /* Dec cur rx win size. */
#define NET_TCP_CONN_TX_ACK_NONE 120 /* Do NOT tx TCP conn ack. */
#define NET_TCP_CONN_TX_ACK 121 /* Tx TCP conn ack. */
#define NET_TCP_CONN_TX_ACK_IMMED 122 /* Tx TCP conn ack immed'ly. */
#define NET_TCP_CONN_TX_ACK_FAULT 123 /* Tx TCP conn ack on fault. */
#define NET_TCP_CONN_TX_ACK_TIMEOUT 124 /* Tx TCP conn ack on timeout. */
#define NET_TCP_CONN_TX_RESET_NONE 130 /* Do NOT tx TCP conn reset. */
#define NET_TCP_CONN_TX_RESET 131 /* Tx TCP conn reset. */
#define NET_TCP_CONN_TX_RESET_FAULT 133 /* Tx TCP conn reset on fault. */
#define NET_TCP_CONN_TX_WIN_RESET 150 /* Reset cur tx win size. */
#define NET_TCP_CONN_TX_WIN_SET 151 /* Set cur tx win size. */
#define NET_TCP_CONN_TX_WIN_INC 152 /* Inc cur tx win size. */
#define NET_TCP_CONN_TX_WIN_DEC 153 /* Dec cur tx win size. */
#define NET_TCP_CONN_TX_WIN_SEG_RXD 155 /* Update cur tx win size based on rx'd seg. */
#define NET_TCP_CONN_TX_WIN_TIMEOUT 156 /* Timeout cur tx win size. */
#define NET_TCP_CONN_TX_WIN_REMOTE_UPDATE 157 /* Update cur tx remote win size. */
#define NET_TCP_CONN_TX_WIN_CONG_INC_SLOW_START 160 /* Inc tx cong win size based on slow start. */
#define NET_TCP_CONN_TX_WIN_CONG_INC_CONG_AVOID 161 /* Inc tx cong win size based on cong avoid. */
#define NET_TCP_CONN_TX_WIN_CONG_INC_REM 162 /* Inc rem tx cong win size. */
#define NET_TCP_CONN_TX_WIN_CONG_SET_SLOW_START 165 /* Set tx cong win size to slow start th. */
#define NET_TCP_CONN_TX_WIN_CONG_SET_FAST_RECOVERY 166 /* Set tx cong win size to fast recovery th. */
#define NET_TCP_CONN_TX_WIN_CONG_SET_TIMEOUT 167 /* Set tx cong win size to timeout th. */
#define NET_TCP_CONN_TX_RTT_INIT 170 /* Init tx RTT ctrls. */
#define NET_TCP_CONN_TX_RTT_RESET 171 /* Reset tx RTT ctrls. */
#define NET_TCP_CONN_TX_RTT_CALC 175 /* Calc tx RTT calcs. */
#define NET_TCP_CONN_TX_RTT_BACKOFF 176 /* Back-off tx RTT ctrls. */
/*$PAGE*/
/*
*********************************************************************************************************
* TCP CONGESTION CONTROL DEFINES
*
* Note(s) : (1) See the following RFC's for TCP Congestion Control summary :
*
* (a) (1) RFC #2001 TCP Congestion Control
* (2) RFC #2581 Slow Start See Note #2
* Congestion Avoidance See Note #3
* Fast Re-transmit See Note #4
* Fast Recovery See Note #4
*
* (b) (1) RFC # 813 Silly Window Syndrome (SWS) See Note #5
* (2) RFC #1122
* (A) Section 4.2.2.14
* (B) Section 4.2.3.3 Receive SWS (RSWS) See Note #5a
* (C) Section 4.2.3.4 Transmit SWS (TSWS) See Note #5b
*
* (c) (1) RFC # 896 Nagle's Algorithm
* (2) RFC #1122
* (A) Section 4.2.2.14
* (B) Section 4.2.3.4
*
* (d) (1) RFC # 813, Section 5 Delayed TCP Acknowledgments See Note #6
* (2) RFC #1122, Section 4.2.3.2
* (3) RFC #2581, Section 4.2
*
* (e) RFC #1122
* (1) Section 4.2.2.2 TCP Segment PUSH
* (2) Section 4.2.2.17 Probing Zero Windows /
* TCP Persist Timer
* (3) Section 4.2.3.5 TCP Connection Failures See Note #7
* (4) Section 4.2.3.9 ICMP Error Message / See 'net_tcp.h
* TCP Congestion Recovery Note #1e'
*
*
* (2) (a) RFC #2581, Section 3.1 states that "the initial value of ssthresh [slow start threshold]
* MAY be arbitrarily high (for example, some implementations use the size of the advertised
* window)".
*
* (1) This amends RFC #2001, Section 2.1 which previously stated that "initialization for
* a given connection sets ... ssthresh to 65535 bytes".
*
* (b) RFC #2581, Section 3.1, states that "when a TCP sender detects segment loss using the
* retransmission timer, the value of ssthresh MUST be set to no more than" :
*
* (3) ssthresh = max (FlightSize / 2, 2 * SMSS)
*
* where
* (A) FlightSize Amount of outstanding data in the network
* (B) SMSS Sender Maximum Segment Size -- the size of the
* largest segment that the sender can transmit
*
* (c) 'SLOW_START_TH' (i.e. 'Slow Start Threshold') abbreviated to 'SST' for some TCP control
* constants to enforce ANSI-compliance of 31-character symbol length uniqueness.
*
* See also 'net_tcp.c NetTCP_TxConnWinSizeHandlerCongCtrl() Notes #2c1A1b & #2c2A1b'.
*
* (3) RFC #2581, Section 3.1 states that ... :
*
* (a) "The initial value of cwnd [congestion window], MUST be less than or equal to 2*SMSS
* bytes and MUST NOT be more than 2 segments."
*
* (1) This amends RFC #2001, Section 2.1 which previously stated that "initialization
* for a given connection sets cwnd to one segment".
*
* (b) "During congestion avoidance, cwnd MUST NOT be increased by more than ... 1 full-sized
* segment per RTT [TCP segment round-trip time]."
*
* (c) "Upon a timeout cwnd MUST be set to no more than ... 1 full-sized segment."
*
* See also 'net_tcp.c NetTCP_TxConnWinSizeHandlerCongCtrl() Notes #2c1A1a, #2c1A4b2,
* #2c2A1a, & #2c2A4'.
*
* (4) RFC #2581, Section 3.2 states that ... :
*
* (a) "The fast retransmit algorithm uses the arrival of 3 duplicate ACKs ... as an indication
* ... [to perform] a retransmission".
*
* (b) "When the third duplicate ACK is received," ...
*
* (1) "Set ssthresh to no more than the value given in equation 3" (see Note #2b).
*
* (2) "Set cwnd to ssthresh plus 3*SMSS. This artificially 'inflates' the congestion
* window by the number of segments (three) that have left the network."
*
* (c) "For each additional duplicate ACK received, increment cwnd by SMSS."
*
* See also 'net_tcp.c NetTCP_TxConnWinSizeHandlerCongCtrl() Notes #2c1B & #2c2B'.
*$PAGE*
* (5) (a) RFC #1122, Section 4.2.3.3 states that "the suggested SWS avoidance algorithm for the
* receiver is ... to avoid advancing the right window edge RCV.NXT+RCV.WND ... until the
* reduction satisfies" :
*
* (1) RCV.BUFF - RCV.USER - RCV.WND >= min(Fr * RCV.BUFF, Eff.snd.MSS)
*
* where
* (A) RCV.BUFF Total receive buffer space
* (B) RCV.USER Data received but not yet consumed
* (C) RCV.WND Space advertised to sender
* (D) Fr Fraction whose recommended value is 1/2
* (E) Eff.snd.MSS Effective send MSS for the connection
*
*
* See also 'net_tcp.c NetTCP_RxConnWinSizeCfgUpdateTh() Note #1'.
* & 'net_tcp.c NetTCP_RxConnWinSizeHandler() Note #3'.
*
* (b) RFC #1122, Section 4.2.3.4 states that "the sender's SWS avoidance algorithm is ...
* [to] send data" :
*
* (3) "If at least a fraction Fs of the maximum window can be sent ... Fs is a fraction
* whose recommended value is 1/2."
*
* (4) "If data is PUSHed and the override timeout occurs ... The override timeout should
* be in the range 0.1 - 1.0 seconds."
*
* See also 'net_tcp.c NetTCP_TxConnTxQ() Note #7b2'.
*
* (6) The following sections state that "a TCP SHOULD implement a delayed ACK" :
*
* (A) RFC # 813, Section 5
* (B) RFC #1122, Section 4.2.3.2
* (C) RFC #2581, Section 4.2
*
* (a) (1) (A) RFC #1122, Section 4.2.3.2 states that "in a stream of full-sized segments
* there SHOULD be an ACK for at least every second segment".
*
* (B) RFC #2581, Section 4.2 reiterates that "an ACK SHOULD be generated for at
* least every second full-sized segment".
*
* (2) However, RFC #2581, Section 4.2 states that "an implementation is deemed to
* comply with this requirement ... by acknowledging at least every second segment,
* regardless of size".
*
* (b) (1) RFC #1122, Section 4.2.3.2 states that "an ACK should not be excessively delayed;
* in particular, the delay MUST be less than 0.5 seconds".
*
* (2) RFC #2581, Section 4.2 reiterates that "an ACK ... MUST be generated within 500 ms
* of the arrival of the first unacknowledged packet".
*
* See also 'net_tcp.c NetTCP_TxConnAck() Note #6'.
*$PAGE*
* (7) RFC #1122, Section 4.2.3.5 states that "excessive retransmission of the same segment by TCP
* indicates some failure of the remote host or the Internet path".
*
* (a) "The following procedure MUST be used to handle excessive retransmissions of data segments" :
*
* (a) "There are ... thresholds ... measuring the amount of retransmission that has occurred
* for the same segment ... measured in time units or as a count of retransmissions."
*
* (c) "When the number of transmissions of the same segment reaches a threshold ... close the
* connection."
*
* (d) "An application MUST be able to set the [threshold] value ... for a particular connection.
* For example, an interactive application might set [the threshold value] to 'infinity'."
*
* See also 'net_tcp.c NetTCP_TxConnReTxQ() Note #3'.
*
* (b) (1) (A) "The value of ... [the threshold] SHOULD correspond to at least 100 seconds."
*
* (B) Therefore, the minimum threshold value is calculated as follows :
*
* [ ] Minimum
* (1) Summation [ Exponential * (Exponential ^ (N - 1)) ] >= Retransmission
* i = 1 --> i = N [ Scalar Base ] Threshold
*
* Summation [ 3 * (2 ^ (N - 1))] >= 100 seconds
* i = 1 --> i = N
*
* N >= 5.06
*
* (2) N = 6
*
* where
* N Minimum Excessive Retransmission Threshold
* (in number of retransmissions)
* Exponential Scalar Exponential Scalar = 3 (see 'TCP ROUND-TRIP
* TIME (RTT) DEFINES Note #3ab')
* Exponential Base Exponential Base = 2 (see 'TCP ROUND-TRIP
* TIME (RTT) DEFINES Note #3c2')
* Minimum Retransmission Minimum Excessive Retransmission Threshold
* Threshold (in seconds; see Note #7b1A)
*
* (2) (A) Stevens, TCP/IP Illustrated, Volume 1, 8th Printing, Section 21.2, Page 299
* states that "on most implementations this total timeout value is not tunable
* ... and its default is ... the more common 9 minutes".
*
* (B) Therefore, the default threshold value is calculated as follows :
*
* (1) [ ]
* [ Exponential * (Exponential ^ (M - 1)) , when < Maximum Exponential ]
* [ Scalar Base Timeout Value ] Common
* Summation [ ] >= Retransmission
* i = 1 --> i = M [ Maximum Exponential ] Threshold
* [ Timeout Value , otherwise ]
* [ ]
*
* [ ]
* [ 3 * (2 ^ (M - 1)) , when < 64 seconds ]
* Summation [ ] >= 9 minutes
* i = 1 --> i = M [ 64 seconds , otherwise ]
* [ ]
*
* M >= 11.98
*
* (2) M = 12
*
* where
* M Default Excessive Retransmission Threshold
* (in number of retransmissions)
* Exponential Scalar Exponential Scalar = 3 (see 'TCP ROUND-TRIP
* TIME (RTT) DEFINES Note #3ab')
* Exponential Base Exponential Base = 2 (see 'TCP ROUND-TRIP
* TIME (RTT) DEFINES Note #3c2')
* Maximum Exponential Maximum Exponential Timeout Value (see 'TCP
* Timeout Value ROUND-TRIP TIME (RTT) DEFINES Note #3c3')
* Common Retransmission Common Default Retransmission Threshold
* Threshold (in minutes; see Note #7b2A)
*********************************************************************************************************
*/
/*$PAGE*/
/* See Note #2b3. */
#define NET_TCP_SST_UNACKD_DATA_NUMER 1
#define NET_TCP_SST_UNACKD_DATA_DENOM 2
#define NET_TCP_SST_MSS_SCALAR 2
#define NET_TCP_CONG_WIN_MSS_SCALAR_INIT 2 /* See Note #3a. */
#define NET_TCP_CONG_WIN_MSS_SCALAR_INC 1 /* See Notes #3b & #4c. */
#define NET_TCP_CONG_WIN_MSS_SCALAR_TIMEOUT 1 /* See Note #3c. */
#define NET_TCP_FAST_RE_TX_ACK_DUP_TH 3 /* See Note #4a. */
/* See Note #4b2. */
#define NET_TCP_FAST_RECOVERY_MSS_SCALAR NET_TCP_FAST_RE_TX_ACK_DUP_TH
/* See Note #5a1D. */
#define NET_TCP_RX_SILLY_WIN_NUMER 1
#define NET_TCP_RX_SILLY_WIN_DENOM 2
/* See Note #5b3. */
#define NET_TCP_TX_SILLY_WIN_NUMER 1
#define NET_TCP_TX_SILLY_WIN_DENOM 2
/* See Note #5b4. */
#define NET_TCP_TX_SILLY_WIN_TIMEOUT_MIN_MS 100
#define NET_TCP_TX_SILLY_WIN_TIMEOUT_MAX_MS 1000
#define NET_TCP_TX_SILLY_WIN_TIMEOUT_DFLT_MS NET_TCP_TX_SILLY_WIN_TIMEOUT_MAX_MS
#define NET_TCP_ACK_DLY_CNT_TH 2 /* See Note #6a. */
#define NET_TCP_ACK_DLY_TIME_MIN_MS 0
#define NET_TCP_ACK_DLY_TIME_MAX_MS 500 /* See Note #6b. */
#define NET_TCP_RE_TX_TH_MIN 6 /* See Note #7b1B2. */
#define NET_TCP_RE_TX_TH_MAX DEF_INT_16U_MAX_VAL /* See Note #7ad. */
#define NET_TCP_RE_TX_TH_DFLT 12 /* See Note #7b2B2. */
/*$PAGE*/
/*
*********************************************************************************************************
* TCP ROUND-TRIP TIME (RTT) / RE-TRANSMIT TIMEOUT (RTO) DEFINES
*
* Note(s) : (1) See the following RFC's for TCP Round-Trip Times (RTT) & Re-transmit Timeout (RTO) summary :
*
* (a) RFC #2988 TCP Round-Trip Time Calculations (RTT) /
* (b) RFC #1122 TCP Retransmission Timeout (RTO)
* (1) Section 4.2.2.15
* (2) Section 4.2.3.1
* (c) RFC # 793, Section 3.7 'Retransmission Timeout'
* (d) Jacobson/Karels, "Congestion Avoidance and Control"
* (e) Karn/Partridge, "Improving Round-Trip Time Estimates in Reliable Transport Protocols"
*
*
* (2) (a) RFC #793, Section 3.7 'Data Communication : Retransmission Timeout' states that
* "because of the variability of the networks that compose an internetwork system
* and the wide range of uses of TCP connections the retransmission timeout must be
* dynamically determined. One procedure for determining a retransmission time out
* is given here as an illustration".
*
* (b) However, RFC #1122, Section 4.2.2.15 states that "the algorithm suggested in
* RFC-793 for calculating the retransmission timeout is now known to be inadequate"
* & Section 4.2.3.1 states that "a host TCP MUST implement Karn's algorithm and
* Jacobson's algorithm for computing the retransmission timeout".
*
* (c) Further, RFC #2988, Section 1 states that "this document codifies the algorithm
* for setting the RTO ... expands on the discussion in section 4.2.3.1 of RFC 1122
* ... [but] does not alter the ... retransmission ... behavior outlined in RFC 2581".
*
* (3) (a) (1) (A) (1) RFC #1122, Section 4.2.3.1 states that "the following values SHOULD be
* used to initialize the estimation parameters for a new connection" :
*
* (a) RTT = 0 seconds
* (b) RTO = 3 seconds
*
* where
* RTO Retransmission Timeout
* RTT Round-Trip Time
*
* (A) RFC #2988, Section 2.1 reiterates that "until a round-trip time (RTT)
* measurement has been made ... the sender SHOULD set RTO <- 3 seconds".
*
* (B) Furthermore, RFC #1122, Section 4.2.3.1.(b) states that "the smoothed
* variance is to be initialized to the value that will result in" these
* values.
*
* Since computing the RTT retransmit timer is given by the following
* equation (see RFC #2988, Section 2.3) :
*
* (1) RTO = RTT_Avg + (RTT_RTO_Gain * RTT_Dev)
*
* then the RTT deviation, or smoothed variance, is given by the following
* equation :
*
* (2) RTT_Dev = (RTO - RTT_Avg) / RTT_RTO_Gain
*
* where
* RTT_Avg RTT Average
* RTT_Dev RTT Deviation
* RTT_RTO_Gain RTT-RTO Gain
*
*
* (2) However, since RFC #2988, Section 2.2 amends the RFC #1122, Section
* 4.2.3.1 RTT initialization; the smoothed RTT average & deviation do
* NOT truly require explicit initialization. Nonetheless, these RTT
* values are initialized to conform with RFC #1122, Section 4.2.3.1.
*
* See also 'net_tcp.c NetTCP_TxConnRTT_Init() Note #1'
* & 'net_tcp.c NetTCP_TxConnRTO_Init() Note #2'.
*$PAGE*
* (B) RFC #2988, Section 2 states that "the rules governing the computation of SRTT
* (smoothed round-trip time), RTTVAR RTTVAR (round-trip time variation), and RTO
* are as follows" :
*
* (a) RFC #2988, Section 2.2 states that for "the first RTT measurement R ...
* the host MUST set" :
*
* (1) SRTT <- R
* (2) RTTVAR <- R/2
* (3) RTO <- SRTT + max(G, K * RTTVAR)
*
* where
* SRTT RTT Smoothed Average
* RTTVAR RTT Variance/Deviation
* RTO Retransmission Timeout
* R RTT First Measurement
* (4) R = R * 1 RTT First Average Gain
* (5) R/2 = R * 1/2 RTT First Deviation Gain
* G RTT Clock Granularity (resolution)
* (6) K = 4 RTT-RTO Gain
*
*
* (b) RFC #2988, Section 2.3 states that for "subsequent RTT measurement R' ...
* a host MUST set" :
*
* (1) RTTVAR <- (1 - beta ) * RTTVAR + beta * |SRTT - R'|
* (2) SRTT <- (1 - alpha) * SRTT + alpha * R'
* (3) RTO <- SRTT + max(G, K * RTTVAR)
*
* where
* SRTT RTT Smoothed Average
* RTTVAR RTT Variance/Deviation
* RTO Retransmission Timeout
* R' RTT Subsequent Measurement(s)
* (4) alpha = 1/8 RTT-Average Gain
* (5) beta = 1/4 RTT-Deviation Gain
* G RTT Clock Granularity (resolution)
* (6) K = 4 RTT-RTO Gain
*
*
* See also 'net_tcp.c NetTCP_TxConnRTT_RTO_Calc() Note #2a1'.
*
* (2) (A) Jacobson/Karels, "Congestion Avoidance and Control", Appendix A.2 states that RTT
* calculations "should be done in integer arithmetic". RFC #2988, Section 2.3 adds
* that RTT calculations "SHOULD be computed using ... 1/8 and ... 1/4" gains (see
* Notes #3a1Bb4 & #3a1Bb5).
*
* (B) (a) Therefore, the RTT integer calculations SHOULD be scaled by 8, the least
* common denominator for the RTT fractional gains.
*
* (b) However, ONLY the RTT measurements, average, & deviation are scaled. RTT
* gains MUST NOT be scaled since scaling the multiplicative gains incorrectly
* exponentiates the RTT calculations :
*
* (1) (RTT_Gain * RTT) = (RTT_Gain * RTT) * (RTT_Scale / RTT_Scale)
*
* (2) = (RTT_Gain * RTT * RTT_Scale) / RTT_Scale
*
* (3) = [RTT_Gain * (RTT * RTT_Scale)] / RTT_Scale
*
* (4) != [(RTT_Gain * RTT_Scale) * (RTT * RTT_Scale)] / RTT_Scale
*
*
* See also 'net_tcp.c NetTCP_TxConnRTT_RTO_Calc() Note #2a3'.
*$PAGE*
* (b) (1) (A) (1) RFC #2988, Section 2.4 states that "whenever RTO is computed, if it is
* less than 1 second then the RTO SHOULD be rounded up to 1 second".
*
* (a) This amends RFC #1122, Section 4.2.3.1 which previously stated that
* "the recommended ... RTO ... lower bound ... SHOULD be measured in
* fractions of a second".
*
* (2) RFC #2988, Section 4 states that "there is no requirement for the clock
* granularity G used for computing RTT measurements ... However, if the
* K*RTTVAR term in the RTO calculation equals zero, the variance term MUST
* be rounded to G seconds".
*
* See also Notes #3a1Ba3 & #3a1Bb3.
*
* See also 'net_tcp.c NetTCP_TxConnRTT_RTO_Calc() Note #2b1A'.
*
* (B) (1) RFC #2988, Section 2.4 adds that "a maximum value MAY be placed on RTO
* provided it is at least 60 seconds".
*
* (2) RFC #1122, Section 4.2.3.1 states that "the recommended ... RTO ... upper
* bound should be 2*MSL".
*
* (3) Stevens, TCP/IP Illustrated, Volume 1, 8th Printing, Section 21.2, Page 299
* states that "the timeout value is doubled for each retransmission, with an
* upper limit of 64 seconds".
*
* See also 'net_tcp.c NetTCP_TxConnRTO_CfgMaxTimeout() Note #1',
* 'net_tcp.c NetTCP_TxConnRTO_CalcBackOff() Note #1b',
* & 'net_tcp.c NetTCP_TxConnRTT_RTO_Calc() Note #2b1B'.
*
* (2) RFC #1122, Section 4.2.3.1 states that an "implementation MUST also include
* 'exponential backoff' for successive RTO values for the same segment".
*
* (A) RFC #2988, Section 5.5 states that "when the retransmission timer expires
* ... the host MUST set RTO <- RTO * 2 ('back off the timer')".
*
* Thus, the TCP retransmission timer exponential back-off scalar value is 2.
*
* (B) Stevens, TCP/IP Illustrated, Volume 1, 8th Printing, Section 21.2, Page 299
* reiterates that "this doubling is called an 'exponential backoff'".
*
* See also 'net_tcp.c NetTCP_TxConnRTO_CalcBackOff() Note #1a'.
*********************************************************************************************************
*/
/*$PAGE*/
#define NET_TCP_TX_RTT_AVG_INIT_SEC 0 /* RTT avg init = 0 sec (see Note #3a1A1a). */
#define NET_TCP_TX_RTT_RTO_INIT_SEC 3 /* RTT RTO init = 3 sec (see Note #3a1A1b). */
/* RTT avg init gain = 1 (see Note #3a1Ba4). */
#define NET_TCP_TX_RTT_GAIN_AVG_INIT 1
#define NET_TCP_TX_RTT_GAIN_AVG_INIT_NUMER 1
#define NET_TCP_TX_RTT_GAIN_AVG_INIT_DENOM 1
/* RTT dev init gain = 1/2 (see Note #3a1Ba5). */
#define NET_TCP_TX_RTT_GAIN_DEV_INIT_NUMER 1
#define NET_TCP_TX_RTT_GAIN_DEV_INIT_DENOM 2
/* RTT avg gain = 1/8 (see Note #3a1Bb4). */
#define NET_TCP_TX_RTT_GAIN_AVG_NUMER 1
#define NET_TCP_TX_RTT_GAIN_AVG_DENOM 8
/* RTT dev gain = 1/4 (see Note #3a1Bb5). */
#define NET_TCP_TX_RTT_GAIN_DEV_NUMER 1
#define NET_TCP_TX_RTT_GAIN_DEV_DENOM 4
/* RTT dev RTO gain = 4 (see Note #3a1Bb6). */
#define NET_TCP_TX_RTT_GAIN_RTO 4
#define NET_TCP_TX_RTT_GAIN_RTO_NUMER 4
#define NET_TCP_TX_RTT_GAIN_RTO_DENOM 1
#define NET_TCP_TX_RTT_SCALE 8 /* RTT vals int-scaled-by-8 (see Note #3a2Ba). */
#define NET_TCP_TX_RTT_MS_SCALE (DEF_TIME_NBR_mS_PER_SEC * NET_TCP_TX_RTT_SCALE)
#define NET_TCP_TX_RTT_AVG_INIT_SEC_SCALED (NET_TCP_TX_RTT_AVG_INIT_SEC * NET_TCP_TX_RTT_SCALE)
#define NET_TCP_TX_RTT_RTO_INIT_SEC_SCALED (NET_TCP_TX_RTT_RTO_INIT_SEC * NET_TCP_TX_RTT_SCALE)
/* RTT dev init scaled (see Note #3a1A1B2). */
#define NET_TCP_TX_RTT_DEV_INIT_SEC_SCALED (((NET_TCP_TX_RTT_RTO_INIT_SEC - NET_TCP_TX_RTT_AVG_INIT_SEC) * NET_TCP_TX_RTT_SCALE) \
/ NET_TCP_TX_RTT_GAIN_RTO)
#define NET_TCP_TX_RTT_AVG_INIT_MS_SCALED (NET_TCP_TX_RTT_AVG_INIT_SEC_SCALED * DEF_TIME_NBR_mS_PER_SEC)
#define NET_TCP_TX_RTT_DEV_INIT_MS_SCALED (NET_TCP_TX_RTT_DEV_INIT_SEC_SCALED * DEF_TIME_NBR_mS_PER_SEC)
#define NET_TCP_TX_RTT_RTO_INIT_MS_SCALED (NET_TCP_TX_RTT_RTO_INIT_SEC_SCALED * DEF_TIME_NBR_mS_PER_SEC)
#define NET_TCP_TX_RTT_NONE 0
#define NET_TCP_TX_RTT_TS_NONE 0L
#define NET_TCP_TX_RTT_TS_MIN DEF_INT_32U_MIN_VAL
#define NET_TCP_TX_RTT_TS_MAX DEF_INT_32U_MAX_VAL
/* RTT clk resolution (see Note #3b1A2). */
#if (NET_TMR_TASK_PERIOD_mS > 0)
#define NET_TCP_TX_RTT_TS_CLK_MS NET_TMR_TASK_PERIOD_mS
#else
#define NET_TCP_TX_RTT_TS_CLK_MS NET_TMR_TIME_TICK
#endif
#define NET_TCP_TX_RTT_TS_CLK_MS_SCALED (NET_TCP_TX_RTT_TS_CLK_MS * NET_TCP_TX_RTT_SCALE)
#define NET_TCP_TX_RTO_NONE 0
#define NET_TCP_TX_RTO_MIN_TIMEOUT_SEC 1 /* RTO min timeout = 1 sec (see Note #3b1A1). */
#define NET_TCP_TX_RTO_MIN_TIMEOUT_MS_SCALED (NET_TCP_TX_RTO_MIN_TIMEOUT_SEC * NET_TCP_TX_RTT_MS_SCALE)
#define NET_TCP_TX_RTO_MAX_TIMEOUT_MIN_SEC 60 /* RTO max timeout min = 60 sec (see Note #3b1B1). */
/* RTO max timeout max = 2 MSL (see Note #3b1B2). */
#define NET_TCP_TX_RTO_MAX_TIMEOUT_MAX_SEC NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC
#define NET_TCP_TX_RTO_MAX_TIMEOUT_DFLT_SEC 64 /* RTO max timeout dflt = 64 sec (see Note #3b1B3). */
#define NET_TCP_TX_RTO_TIMEOUT_BACKOFF_SCALAR 2 /* RTO exponential back-off scalar (see Note #3b2A). */
#define NET_TCP_TX_RTT_RTO_STATE_NONE 0
#define NET_TCP_TX_RTT_RTO_STATE_INIT 10
#define NET_TCP_TX_RTT_RTO_STATE_RESET 11
#define NET_TCP_TX_RTT_RTO_STATE_CALC 20
#define NET_TCP_TX_RTT_RTO_STATE_RE_TX 30
/*$PAGE*/
/*
*********************************************************************************************************
* DATA TYPES
*********************************************************************************************************
*/
/*
*********************************************************************************************************
* TCP CONNECTION QUANTITY DATA TYPE
*
* Note(s) : (1) See also 'TCP CONNECTION IDENTIFICATION DATA TYPE Note #1'.
*********************************************************************************************************
*/
typedef CPU_INT16U NET_TCP_CONN_QTY; /* Defines max qty of TCP conns to support. */
/*
*********************************************************************************************************
* TCP PORT NUMBER DATA TYPE
*********************************************************************************************************
*/
typedef NET_PORT_NBR NET_TCP_PORT_NBR; /* Defines TCP port nbr size. */
/*
*********************************************************************************************************
* TCP SEQUENCE NUMBER DATA TYPE
*********************************************************************************************************
*/
typedef CPU_INT32U NET_TCP_SEQ_NBR;
/*
*********************************************************************************************************
* TCP SEGMENT SIZE DATA TYPE
*********************************************************************************************************
*/
typedef CPU_INT16U NET_TCP_SEG_SIZE;
/*
*********************************************************************************************************
* TCP WINDOW SIZE DATA TYPE
*********************************************************************************************************
*/
typedef CPU_INT16U NET_TCP_WIN_SIZE;
/*$PAGE*/
/*
*********************************************************************************************************
* TCP CONNECTION IDENTIFICATION DATA TYPE
*
* Note(s) : (1) (a) NET_TCP_CONN_NBR_MAX SHOULD be globally #define'd AFTER 'NET_TCP_CONN_ID' data type
* declared.
*
* (b) Since TCP connection handle identifiers are data-typed as 16-bit signed integers,
* the maximum number of valid connection identifiers (i.e. non-negative) is the total
* number of positive values that 16-bit signed integers support.
*********************************************************************************************************
*/
typedef CPU_INT16S NET_TCP_CONN_ID;
#define NET_TCP_CONN_NBR_MAX DEF_INT_16S_MAX_VAL /* See Note #1. */
/*
*********************************************************************************************************
* TCP CONNECTION STATE DATA TYPE
*********************************************************************************************************
*/
typedef CPU_INT08U NET_TCP_CONN_STATE;
/*
*********************************************************************************************************
* TCP RECEIVE QUEUE STATE DATA TYPE
*********************************************************************************************************
*/
typedef CPU_INT08U NET_TCP_RX_Q_STATE;
/*
*********************************************************************************************************
* TCP TRANSMIT QUEUE STATE DATA TYPE
*********************************************************************************************************
*/
typedef CPU_INT08U NET_TCP_TX_Q_STATE;
/*
*********************************************************************************************************
* TCP RTT MEASUREMENT DATA TYPES
*
* Note(s) : (1) RTT measurement data types MUST be defined to ensure sufficient range for both scaled
* & un-scaled, signed & unsigned time measurement values.
*********************************************************************************************************
*/
typedef CPU_INT08U NET_TCP_TX_RTT_STATE;
/* See Note #1. */
typedef CPU_INT32U NET_TCP_TX_RTT_MS;
typedef CPU_INT32S NET_TCP_TX_RTT_MS_SCALED;
typedef NET_TCP_TX_RTT_MS NET_TCP_TX_RTT_TS_MS;
/*
*********************************************************************************************************
* TCP TIMEOUT DATA TYPES
*********************************************************************************************************
*/
typedef CPU_INT32U NET_TCP_TIMEOUT_MS;
typedef CPU_INT16U NET_TCP_TIMEOUT_SEC;
/*$PAGE*/
/*
*********************************************************************************************************
* TCP HEADER
*
* Note(s) : (1) See RFC #793, Section 3.1 for TCP segment header format.
*
* (2) TCP Header Length & Flags are coded in the thirteenth & fourteenth octets of an IP header
* as follows :
*
* 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
* ---------------------------------------------------
* | H L E N | Z E R O |URG|ACK|PSH|RST|SYN|FIN|
* ---------------------------------------------------
*
* where
* HLEN TCP Headers' length in 32-bit words; MUST be at least 5 (20-octet header)
* & MUST be less than or equal to 15 (60-octet header)
* ZERO MUST be zero; i.e. '000000'
* URG Segment Urgent Data Pointer Valid (see Note #3) :
* '0' - Urgent Data NOT available (default)
* '1' - Urgent Data available
* ACK Segment Acknowledgement Number Valid :
* '0' - Acknowledgement Number NOT available
* '1' - Acknowledgement Number available
* PSH Segment Push Data Request :
* '0' - Push Data NOT requested (default)
* '1' - Push Data requested
* RST Connection Reset Request :
* '0' - Connection Reset NOT requested (default)
* '1' - Connection Reset requested
* SYN Connection Synchronization Request :
* '0' - Connection Synchronization NOT requested (default)
* '1' - Connection Synchronization requested
* FIN Connection Close Request :
* '0' - Connection Close NOT requested (default)
* '1' - Connection Close requested
*
* (3) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b').
*********************************************************************************************************
*/
/* ------------------- NET TCP HDR -------------------- */
typedef struct net_tcp_hdr {
NET_TCP_PORT_NBR PortSrc; /* TCP seg src port. */
NET_TCP_PORT_NBR PortDest; /* TCP seg dest port. */
NET_TCP_SEQ_NBR SeqNbr; /* TCP seg seq nbr. */
NET_TCP_SEQ_NBR AckNbr; /* TCP seg ack nbr. */
CPU_INT16U HdrLen_Flags; /* TCP seg hdr len/flags (see Note #2). */
NET_TCP_WIN_SIZE WinSize; /* TCP conn win size. */
NET_CHK_SUM ChkSum; /* TCP seg chk sum. */
CPU_INT16U UrgentPtr; /* TCP seg urgent ptr (see Note #3). */
NET_TCP_OPT_SIZE Opts[NET_TCP_HDR_OPT_NBR_MAX]; /* TCP seg opts (if any). */
} NET_TCP_HDR;
/*
*********************************************************************************************************
* TCP PSEUDO-HEADER
*
* Note(s) : (1) See RFC #793, Section 3.1 'Header Format : Checksum' for TCP pseudo-header format.
*********************************************************************************************************
*/
/* ---------------- NET TCP PSEUDO-HDR ---------------- */
typedef struct net_tcp_pseudo_hdr {
NET_IP_ADDR AddrSrc; /* TCP seg src addr. */
NET_IP_ADDR AddrDest; /* TCP seg dest addr. */
CPU_INT08U Zero; /* Field MUST be zero'd; i.e. ALL bits clr'd. */
CPU_INT08U Protocol; /* TCP protocol. */
CPU_INT16U TotLen; /* TCP seg tot len. */
} NET_TCP_PSEUDO_HDR;
/*$PAGE*/
/*
*********************************************************************************************************
* TCP HEADER OPTION CONFIGURATION DATA TYPES
*********************************************************************************************************
*/
/*
*********************************************************************************************************
* TCP MAXIMUM SEGMENT SIZE OPTION CONFIGURATION DATA TYPE
*********************************************************************************************************
*/
typedef struct net_tcp_opt_cfg_max_seg_size {
NET_TYPE Type; /* TCP opt type. */
NET_TCP_SEG_SIZE MaxSegSize; /* TCP max seg size. */
void *NextOptPtr; /* Ptr to next TCP opt cfg. */
} NET_TCP_OPT_CFG_MAX_SEG_SIZE;
/*$PAGE*/
/*
*********************************************************************************************************
* TCP CONNECTION DATA TYPE
*
* NET_TCP_CONN
* |-------------|
* | Conn Type |
* |-------------| Next TCP
* | O----------> Connection
* |-------------|
* | IDs |
* |-------------|
* | Conn State |
* |-------------|
* | Rx Ctrl |
* | Rx Q's |
* |-------------|
* | Tx Ctrl |
* | Tx Q's |
* | Tx Tmrs |
* |-------------|
* | Timeouts |
* |-------------|
* | Flags |
* |-------------|
*
*
* Note(s) : (1) Forced word-alignment at start of TCP connection NOT required since first data member
* 'Type' is declared as 'CPU_INT32U'.
*
* (2) 'NextPtr' ideally declared as 'NET_TCP_CONN' pointer; declared as 'void' pointer because
* 'NET_TCP_CONN' NOT fully defined at time of declaration.
*
* (3) #### 'TimeoutUser_sec' updates NOT fully implemented.
*********************************************************************************************************
*/
typedef struct net_tcp_conn {
NET_TYPE Type; /* Type cfg'd @ init : NET_TCP_TYPE_CONN. */
void *NextPtr; /* Ptr to NEXT conn. */
NET_TCP_CONN_ID ID; /* TCP conn id. */
NET_CONN_ID ID_Conn; /* Conn id. */
NET_TCP_CONN_STATE ConnState; /* Cur TCP conn state. */
CPU_INT08U ConnCloseCode; /* Conn close code. */
CPU_BOOLEAN ConnCloseAppFlag; /* Conn close app flag. */
CPU_BOOLEAN ConnCloseTimeoutFaultFlag; /* Conn close timeout fault flag. */
/* (All seg sizes in octets.) */
NET_TCP_SEG_SIZE MaxSegSizeLocal; /* Local max seg size to advertise to remote host. */
NET_TCP_SEG_SIZE MaxSegSizeRemote; /* Max seg size advertised by remote host. */
NET_TCP_SEG_SIZE MaxSegSizeConn; /* Max seg size calc'd for conn. */
NET_TCP_SEQ_NBR RxSeqNbrSync; /* Sync rx seq nbr. */
NET_TCP_SEQ_NBR RxSeqNbrNext; /* Next rx seq nbr. */
NET_TCP_SEQ_NBR RxSeqNbrLast; /* Last rx seq nbr. */
NET_TCP_SEQ_NBR RxSeqNbrClose; /* Close rx seq nbr. */
NET_TCP_WIN_SIZE RxWinSizeCfgd; /* Rx win size cfg'd (all win sizes in octets). */
NET_TCP_WIN_SIZE RxWinSizeCfgdActual; /* Rx win size cfg'd actual. */
NET_TCP_WIN_SIZE RxWinSizeCfgdActualUpdateRem; /* Rx win size cfg'd actual rem'ing to update. */
NET_TCP_WIN_SIZE RxWinSizeCalcd; /* Rx win size calc'd. */
NET_TCP_WIN_SIZE RxWinSizeActual; /* Rx win size actual/advertised. */
NET_TCP_WIN_SIZE RxWinSizeUpdateTh; /* Rx win size update th (rx silly win ctrl). */
NET_TCP_RX_Q_STATE RxQ_State; /* Rx Q state. */
NET_BUF *RxQ_Transport_Head; /* Head of transport rx Q to q TCP pkts until seq'd. */
NET_BUF *RxQ_Transport_Tail; /* Tail of transport rx Q to q TCP pkts until seq'd. */
NET_BUF *RxQ_App_Head; /* Head of app data rx Q to q TCP pkts until app rd(s).*/
NET_BUF *RxQ_App_Tail; /* Tail of app data rx Q to q TCP pkts until app rd(s).*/
/*$PAGE*/
NET_TCP_SEQ_NBR TxSeqNbrSync; /* Sync tx seq nbr. */
NET_TCP_SEQ_NBR TxSeqNbrNext; /* Next tx seq nbr. */
NET_TCP_SEQ_NBR TxSeqNbrNextQ; /* Next tx seq nbr NOT yet tx'd; i.e. in tx Q. */
NET_TCP_SEQ_NBR TxSeqNbrUnReTxd; /* Last tx seq nbr NOT re- tx'd. */
NET_TCP_SEQ_NBR TxSeqNbrUnAckd; /* Last tx seq nbr NOT yet ack'd. */
NET_TCP_SEQ_NBR TxSeqNbrUnAckdPrev; /* Prev tx seq nbr NOT yet ack'd. */
NET_TCP_SEQ_NBR TxSeqNbrUnAckdAlignDelta; /* Tx seq nbr NOT yet ack'd alignment delta. */
NET_TCP_SEQ_NBR TxSeqNbrLast; /* Last tx seq nbr. */
NET_TCP_SEQ_NBR TxSeqNbrClose; /* Close tx seq nbr. */
NET_TCP_SEQ_NBR TxWinUpdateSeqNbr; /* Last rx seq nbr that updated remote rx win size. */
NET_TCP_SEQ_NBR TxWinUpdateAckNbr; /* Last rx ack nbr that updated remote rx win size. */
NET_TCP_WIN_SIZE TxWinUpdateWinSize; /* Last rx win size that updated remote rx win size. */
CPU_INT16U TxWinRxdAckDupCtr; /* Rx'd duplicate ack ctr. */
NET_TCP_SEQ_NBR TxWinRxdLastSeqNbr; /* Last rx'd seq nbr. */
NET_TCP_SEQ_NBR TxWinRxdLastAckNbr; /* Last rx'd ack nbr. */
NET_TCP_WIN_SIZE TxWinRxdLastWinSize; /* Last rx'd win size. */
NET_TCP_WIN_SIZE TxWinSizeCfgd; /* Tx win size cfg'd (all win sizes in octets). */
NET_TCP_WIN_SIZE TxWinSizeCfgdRem; /* Tx win size rem'ing to q tx app data. */
NET_TCP_WIN_SIZE TxWinSizeRemote; /* Win size advertised by remote host. */
NET_TCP_WIN_SIZE TxWinSizeRemoteMax; /* Max win size advertised by remote host. */
NET_TCP_WIN_SIZE TxWinSizeRemoteActual; /* Tx win size actual for remote host. */
NET_TCP_WIN_SIZE TxWinSizeRemoteRem; /* Tx win size rem'ing for remote host. */
NET_TCP_WIN_SIZE TxWinSizeSlowStartTh; /* Tx win size slow start th. */
NET_TCP_WIN_SIZE TxWinSizeSlowStartThInit; /* Tx win size slow start init th. */
NET_TCP_WIN_SIZE TxWinSizeCongInit; /* Tx win size init'd by cong ctrl. */
NET_TCP_WIN_SIZE TxWinSizeCongCalcdActual; /* Tx win size actual calc'd cong ctrl. */
NET_TCP_WIN_SIZE TxWinSizeCongCalcdCur; /* Tx win size cur calc'd cong ctrl. */
NET_TCP_WIN_SIZE TxWinSizeCongRem; /* Tx win size rem'ing by cong ctrl. */
NET_TCP_WIN_SIZE TxWinSizeAvail; /* Tx win size avail. */
NET_TCP_WIN_SIZE TxWinSizeMinTh; /* Tx win size min th (tx silly win ctrl). */
CPU_BOOLEAN TxWinSizeNagleEn; /* Tx win size Nagle alg en. */
NET_TCP_TIMEOUT_MS TxWinSillyWinTimeout_ms; /* Tx silly win timeout (in ms). */
NET_TCP_TIMEOUT_SEC TxWinZeroWinTimeout_ms; /* Tx zero win timeout (in ms). */
CPU_INT16U TxSegReTxTh; /* TCP conn nbr of re-tx th. */
NET_TCP_TIMEOUT_MS TxAckDlyTimeout_ms; /* Tx ack dly timeout (in ms). */
NET_TMR *TxAckDlyTmr; /* Tx ack dly tmr. */
CPU_INT16U TxAckDlyCnt; /* Tx ack dly cur cnt. */
CPU_BOOLEAN TxAckImmedRxdPushEn; /* Tx immed ack for rx'd TCP push seg(s) en. */
NET_TCP_TX_RTT_MS_SCALED TxRTT_Avg_ms_scaled; /* RTT smoothed avg (in int-scaled ms ). */
NET_TCP_TX_RTT_MS_SCALED TxRTT_Dev_ms_scaled; /* RTT mean dev (in int-scaled ms ). */
NET_TCP_TX_RTT_MS_SCALED TxRTT_RTO_ms_scaled; /* RTT re-tx timeout (in int-scaled ms ). */
NET_TCP_TX_RTT_MS_SCALED TxRTT_RTO_Max_ms_scaled; /* RTT re-tx timeout max (in int-scaled ms ). */
NET_TCP_TIMEOUT_MS TxRTT_Avg_ms; /* RTT smoothed avg (in ms ). */
NET_TCP_TIMEOUT_MS TxRTT_Dev_ms; /* RTT mean dev (in ms ). */
NET_TCP_TIMEOUT_MS TxRTT_RTO_ms; /* RTT re-tx timeout (in ms ). */
NET_TCP_TIMEOUT_MS TxRTT_RTO_Max_ms; /* RTT re-tx timeout max (in ms ). */
NET_TCP_TIMEOUT_SEC TxRTT_RTO_sec; /* RTT re-tx timeout (in secs ). */
NET_TCP_TIMEOUT_SEC TxRTT_RTO_Max_sec; /* RTT re-tx timeout max (in secs ). */
NET_TMR_TICK TxRTT_RTO_tick; /* RTT re-tx timeout (in ticks). */
NET_TCP_TX_RTT_STATE TxRTT_RTO_State; /* RTT-RTO state. */
NET_IP_TOS TxIP_TOS; /* TCP conn tx IP TOS. */
NET_IP_TTL TxIP_TTL; /* TCP conn tx IP TTL. */
CPU_INT16U TxIP_Flags; /* TCP conn tx IP flags. */
NET_TCP_TX_Q_STATE TxQ_State; /* Tx Q state. */
NET_BUF *TxQ_Head; /* Head of Q of TCP pkts to tx. */
NET_BUF *TxQ_Tail; /* Tail of Q of TCP pkts to tx. */
NET_TMR *TxQ_IdleTmr; /* Tx Q idle tmr. */
NET_TMR *TxQ_SillyWinTmr; /* Tx Q silly win persist tmr. */
NET_TMR *TxQ_ZeroWinTmr; /* Tx Q zero win persist tmr. */
NET_BUF *ReTxQ_Head; /* Head of Q of TCP pkts to re-tx on timeout. */
NET_BUF *ReTxQ_Tail; /* Tail of Q of TCP pkts to re-tx on timeout. */
NET_TMR *ReTxQ_Tmr; /* Re-tx Q tmr. */
/*$PAGE*/
NET_TMR *KeepAliveTmr; /* TCP conn keep-alive tmr. */
NET_TMR *TimeoutTmr; /* TCP conn timeout tmr. */
NET_TCP_TIMEOUT_SEC TimeoutConn_sec; /* TCP conn timeout (in secs). */
NET_TCP_TIMEOUT_SEC TimeoutUser_sec; /* TCP user timeout (in secs) [see Note #3]. */
NET_TCP_TIMEOUT_SEC TimeoutMaxSeg_sec; /* TCP max seg timeout (in secs). */
CPU_INT16U Flags; /* Conn flags. */
} NET_TCP_CONN;
/*$PAGE*/
/*
*********************************************************************************************************
* GLOBAL VARIABLES
*********************************************************************************************************
*/
NET_TCP_EXT NET_TCP_CONN NetTCP_ConnTbl[NET_TCP_CFG_NBR_CONN];
NET_TCP_EXT NET_TCP_CONN *NetTCP_ConnPoolPtr; /* Ptr to pool of free TCP conns. */
NET_TCP_EXT NET_STAT_POOL NetTCP_ConnPoolStat;
NET_TCP_EXT NET_TCP_SEQ_NBR NetTCP_TxSeqNbrCtr; /* Global tx seq nbr ctr. */
#if (NET_CTR_CFG_STAT_EN == DEF_ENABLED) /* ------------------- NET TCP STATS ------------------ */
NET_TCP_EXT NET_CTR NetTCP_StatRxPktCtr; /* Nbr rx'd segs. */
NET_TCP_EXT NET_CTR NetTCP_StatRxSegProcessedCtr; /* Nbr rx'd segs demux'd to app conn. */
NET_TCP_EXT NET_CTR NetTCP_StatTxSegCtr; /* Nbr tx'd segs. */
NET_TCP_EXT NET_CTR NetTCP_StatTxSegConnSyncCtr; /* Nbr tx'd conn sync segs. */
NET_TCP_EXT NET_CTR NetTCP_StatTxSegConnCloseCtr; /* Nbr tx'd conn close segs. */
NET_TCP_EXT NET_CTR NetTCP_StatTxSegConnAckCtr; /* Nbr tx'd conn ack segs. */
NET_TCP_EXT NET_CTR NetTCP_StatTxSegConnResetCtr; /* Nbr tx'd conn reset segs. */
NET_TCP_EXT NET_CTR NetTCP_StatTxSegConnProbeCtr; /* Nbr tx'd conn probe segs. */
NET_TCP_EXT NET_CTR NetTCP_StatTxSegConnTxQ_Ctr; /* Nbr tx'd conn tx Q segs. */
NET_TCP_EXT NET_CTR NetTCP_StatTxSegConnReTxQ_Ctr; /* Nbr tx'd conn re-tx Q segs. */
#endif
#if (NET_CTR_CFG_ERR_EN == DEF_ENABLED) /* ------------------- NET TCP ERRS ------------------- */
NET_TCP_EXT NET_CTR NetTCP_ErrNullPtrCtr; /* Nbr null TCP conn ptr accesses. */
NET_TCP_EXT NET_CTR NetTCP_ErrNoneAvailCtr; /* Nbr TCP conn unavail accesses. */
NET_TCP_EXT NET_CTR NetTCP_ErrNotUsedCtr; /* Nbr unused TCP conn accesses. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxHdrLenCtr; /* Nbr rx'd segs with invalid hdr len. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxHdrSegLenCtr; /* Nbr rx'd segs with invalid seg len. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxHdrPortSrcCtr; /* Nbr rx'd segs with invalid src port. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxHdrPortDestCtr; /* Nbr rx'd segs with invalid dest port. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxHdrFlagsCtr; /* Nbr rx'd segs with invalid flags. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxHdrChkSumCtr; /* Nbr rx'd segs with invalid chk sum. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxHdrOptsCtr; /* Nbr rx'd segs with unknown/invalid opts. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxDestCtr; /* Nbr rx'd segs for unavail dest. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxPktDiscardedCtr; /* Nbr rx'd segs discarded. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxOptTypeCtr; /* Nbr tx pkts with invalid opt type. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxPktDiscardedCtr; /* Nbr tx segs discarded. */
NET_TCP_EXT NET_CTR NetTCP_ErrConnInvalidCtr; /* Nbr invalid TCP conn ID accesses. */
NET_TCP_EXT NET_CTR NetTCP_ErrConnInvalidOpCtr; /* Nbr invalid TCP conn ops. */
NET_TCP_EXT NET_CTR NetTCP_ErrConnInvalidStateCtr; /* Nbr invalid TCP conn states. */
NET_TCP_EXT NET_CTR NetTCP_ErrConnCloseCtr; /* Nbr fault TCP conn closes. */
#if (NET_ERR_CFG_ARG_CHK_DBG_EN == DEF_ENABLED)
NET_TCP_EXT NET_CTR NetTCP_ErrRxInvalidBufIxCtr; /* Nbr rx pkts with invalid buf ix. */
NET_TCP_EXT NET_CTR NetTCP_ErrRxHdrDataLenCtr; /* Nbr rx'd segs with invalid data len. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxInvalidProtocolCtr; /* Nbr tx pkts with unknown/unsupported protocol. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxInvalidSizeCtr; /* Nbr tx reqs with invalid data size. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxInvalidBufIxCtr; /* Nbr tx pkts with invalid buf ix. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxHdrDataLenCtr; /* Nbr tx segs with invalid protocol/data len. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxHdrPortSrcCtr; /* Nbr tx segs with invalid src port. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxHdrPortDestCtr; /* Nbr tx segs with invalid dest port. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxHdrFlagsCtr; /* Nbr tx segs with invalid flags. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxHdrOptLenCtr; /* Nbr tx segs with invalid opt len. */
NET_TCP_EXT NET_CTR NetTCP_ErrTxHdrOptCfgCtr; /* Nbr tx segs with invalid opt cfg. */
NET_TCP_EXT NET_CTR NetTCP_ErrConnInvalidTypeCtr; /* Nbr TCP conn invalid type accesses. */
#endif
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* MACRO'S
*********************************************************************************************************
*/
/*
*********************************************************************************************************
* NET_TCP_TX_GET_SEQ_NBR()
*
* Description : Get next TCP transmit sequence number.
*
* Argument(s) : seq_nbr Variable that will receive the returned TCP transmit sequence number.
*
* Return(s) : none.
*
* Caller(s) : NetTCP_TxConnSync().
*
* This macro is an INTERNAL network protocol suite macro & SHOULD NOT be called by
* application function(s).
*
* Note(s) : (1) (a) RFC #1122, Section 4.2.2.9 states that "a TCP MUST use the specified clock-driven
* selection of initial sequence numbers".
*
* (b) However; Stevens, TCP/IP Illustrated, Volume 1, 8th Printing, Section 18.2, Page 232
* states that for "4.4BSD (and most Berkeley-derived implementations)" ... :
*
* (1) "When the system is initialized the initial send sequence number is initialized
* to 1. This practice violates the Host Requirements RFC [#1122]."
*
* (2) "This variable is then incremented by 64,000" ... :
* (A) "every half-second" and ...
* (B) "additionally, each time a connection is established."
*
* (c) As a compromise :
*
* (1) The developer is required to configure the TCP transmit initial sequence number
* counter (see 'net_bsp.c NetTCP_InitTxSeqNbr() Note #1').
*
* (2) However, the TCP initial transmit sequence number is incremented by a fixed
* value each time a new TCP connection is established (see also Note #2b2B).
*
* (2) Return TCP sequence number is NOT converted from host-order to network-order.
*
* (3) ALL functions which call NET_TCP_TX_GET_SEQ_NBR() macro MUST declare local variable
* 'cpu_sr' if critical section method is configured as CPU_CRITICAL_METHOD_STATUS_LOCAL :
*
* #if (CPU_CFG_CRITICAL_METHOD == CPU_CRITICAL_METHOD_STATUS_LOCAL)
* CPU_SR cpu_sr;
* #endif
*
* (a) #### Macro require critical section for exclusive access?
*********************************************************************************************************
*/
#if (NET_DBG_CFG_TEST_EN != DEF_ENABLED)
#define NET_TCP_TX_GET_SEQ_NBR(seq_nbr) { CPU_CRITICAL_ENTER(); \
NET_UTIL_VAL_COPY_32(&(seq_nbr), &NetTCP_TxSeqNbrCtr); \
NetTCP_TxSeqNbrCtr += NET_TCP_TX_SEQ_NBR_CTR_INC; \
CPU_CRITICAL_EXIT(); }
#else
#define NET_TCP_TX_GET_SEQ_NBR(seq_nbr) { CPU_CRITICAL_ENTER(); \
NET_UTIL_VAL_COPY_32(&(seq_nbr), &NetTCP_TxSeqNbrCtr); \
CPU_CRITICAL_EXIT(); }
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* FUNCTION PROTOTYPES
*********************************************************************************************************
*/
void NetTCP_Init (NET_ERR *perr);
/* ----------- RX FNCTS ----------- */
void NetTCP_Rx (NET_BUF *pbuf,
NET_ERR *perr);
CPU_INT16U NetTCP_RxAppData (NET_TCP_CONN_ID conn_id_tcp,
void *pdata_buf,
CPU_INT16U data_buf_len,
CPU_INT16U flags,
NET_ERR *perr);
/* ----------- TX FNCTS ----------- */
void NetTCP_TxConnReq (NET_TCP_CONN_ID conn_id_tcp,
NET_IP_TOS TOS,
NET_IP_TTL TTL,
CPU_INT16U flags_ip,
void *popts_ip,
NET_ERR *perr);
CPU_INT16U NetTCP_TxConnAppData (NET_TCP_CONN_ID conn_id_tcp,
void *p_data,
CPU_INT16U data_len,
CPU_INT16U flags,
NET_ERR *perr);
/* ------ TCP CONN API FNCTS ------ */
NET_TCP_CONN_ID NetTCP_ConnGet (NET_ERR *perr);
void NetTCP_ConnFree (NET_TCP_CONN_ID conn_id_tcp);
void NetTCP_ConnCloseFromConn (NET_TCP_CONN_ID conn_id_tcp);
void NetTCP_ConnSetID_Conn (NET_TCP_CONN_ID conn_id_tcp,
NET_CONN_ID conn_id,
NET_ERR *perr);
void NetTCP_ConnSetStateListen (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
void NetTCP_ConnReqClose (NET_TCP_CONN_ID conn_id_tcp,
CPU_INT08U conn_close_code,
NET_ERR *perr);
/* ------ TCP CONN CFG FNCTS ------ */
CPU_BOOLEAN NetTCP_ConnCfgMaxSegSizeLocal (NET_TCP_CONN_ID conn_id_tcp,
NET_TCP_SEG_SIZE max_seg_size);
CPU_BOOLEAN NetTCP_ConnCfgRxWinSize (NET_TCP_CONN_ID conn_id_tcp,
NET_TCP_WIN_SIZE win_size);
CPU_BOOLEAN NetTCP_ConnCfgReTxMaxTh (NET_TCP_CONN_ID conn_id_tcp,
CPU_INT16U nbr_re_tx);
CPU_BOOLEAN NetTCP_ConnCfgReTxMaxTimeout (NET_TCP_CONN_ID conn_id_tcp,
NET_TCP_TIMEOUT_SEC timeout_sec);
CPU_BOOLEAN NetTCP_ConnCfgTxAckImmedRxdPushEn(NET_TCP_CONN_ID conn_id_tcp,
CPU_BOOLEAN tx_immed_ack_en);
/* ---- TCP CONN STATUS FNCTS ----- */
CPU_BOOLEAN NetTCP_ConnIsUsed (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
NET_STAT_POOL NetTCP_ConnPoolStatGet (void);
void NetTCP_ConnPoolStatResetMaxUsed (void);
/*$PAGE*/
/*
*********************************************************************************************************
* FUNCTION PROTOTYPES
* DEFINED IN OS'S net_os.c
*********************************************************************************************************
*/
void NetOS_TCP_Init (NET_ERR *perr); /* Create TCP objs. */
/* Clr TCP conn rx Q signal. */
void NetOS_TCP_RxQ_Clr (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Wait for TCP conn rx Q signal. */
void NetOS_TCP_RxQ_Wait (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Signal TCP conn rx Q. */
void NetOS_TCP_RxQ_Signal (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Abort TCP conn rx Q. */
void NetOS_TCP_RxQ_Abort (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Set dflt TCP conn rx Q timeout. */
void NetOS_TCP_RxQ_TimeoutDflt (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Set TCP conn rx Q timeout. */
void NetOS_TCP_RxQ_TimeoutSet (NET_TCP_CONN_ID conn_id_tcp,
CPU_INT32U timeout_ms,
NET_ERR *perr);
/* Get TCP conn rx Q timeout. */
CPU_INT32U NetOS_TCP_RxQ_TimeoutGet_ms(NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Clr TCP conn tx Q signal. */
void NetOS_TCP_TxQ_Clr (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Wait for TCP conn tx Q signal. */
void NetOS_TCP_TxQ_Wait (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Signal TCP conn tx Q. */
void NetOS_TCP_TxQ_Signal (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Abort TCP conn tx Q. */
void NetOS_TCP_TxQ_Abort (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Set dflt TCP conn tx Q timeout. */
void NetOS_TCP_TxQ_TimeoutDflt (NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/* Set TCP conn tx Q timeout. */
void NetOS_TCP_TxQ_TimeoutSet (NET_TCP_CONN_ID conn_id_tcp,
CPU_INT32U timeout_ms,
NET_ERR *perr);
/* Get TCP conn tx Q timeout. */
CPU_INT32U NetOS_TCP_TxQ_TimeoutGet_ms(NET_TCP_CONN_ID conn_id_tcp,
NET_ERR *perr);
/*
*********************************************************************************************************
* FUNCTION PROTOTYPES
* DEFINED IN PRODUCT'S net_bsp.c
*********************************************************************************************************
*/
void NetTCP_InitTxSeqNbr (void); /* Init TCP tx seq nbr ctr. */
NET_TCP_TX_RTT_TS_MS NetTCP_TxConnRTT_GetTS_ms(void); /* Get TCP tx RTT TS (in ms). */
/*$PAGE*/
/*
*********************************************************************************************************
* CONFIGURATION ERRORS
*********************************************************************************************************
*/
#ifndef NET_TCP_CFG_NBR_CONN
#error "NET_TCP_CFG_NBR_CONN not #define'd in 'net_cfg.h'"
#error " [MUST be > 0 ]"
#error " [ && <= NET_TCP_CONN_NBR_MAX]"
#elif ((NET_TCP_CFG_NBR_CONN < 1) || \
(NET_TCP_CFG_NBR_CONN > NET_TCP_CONN_NBR_MAX))
#error "NET_TCP_CFG_NBR_CONN illegally #define'd in 'net_cfg.h'"
#error " [MUST be > 0 ]"
#error " [ && <= NET_TCP_CONN_NBR_MAX]"
#endif
#ifndef NET_TCP_CFG_RX_WIN_SIZE_OCTET
#error "NET_TCP_CFG_RX_WIN_SIZE_OCTET not #define'd in 'net_cfg.h'"
#error " [MUST be >= NET_TCP_WIN_SIZE_MIN]"
#error " [ && <= NET_TCP_WIN_SIZE_MAX]"
#elif ((NET_TCP_CFG_RX_WIN_SIZE_OCTET < NET_TCP_WIN_SIZE_MIN) || \
(NET_TCP_CFG_RX_WIN_SIZE_OCTET > NET_TCP_WIN_SIZE_MAX))
#error "NET_TCP_CFG_RX_WIN_SIZE_OCTET illegally #define'd in 'net_cfg.h'"
#error " [MUST be >= NET_TCP_WIN_SIZE_MIN]"
#error " [ && <= NET_TCP_WIN_SIZE_MAX]"
#endif
#ifndef NET_TCP_CFG_TX_WIN_SIZE_OCTET
#error "NET_TCP_CFG_TX_WIN_SIZE_OCTET not #define'd in 'net_cfg.h'"
#error " [MUST be >= NET_TCP_WIN_SIZE_MIN]"
#error " [ && <= NET_TCP_WIN_SIZE_MAX]"
#elif ((NET_TCP_CFG_TX_WIN_SIZE_OCTET < NET_TCP_WIN_SIZE_MIN) || \
(NET_TCP_CFG_TX_WIN_SIZE_OCTET > NET_TCP_WIN_SIZE_MAX))
#error "NET_TCP_CFG_TX_WIN_SIZE_OCTET illegally #define'd in 'net_cfg.h'"
#error " [MUST be >= NET_TCP_WIN_SIZE_MIN]"
#error " [ && <= NET_TCP_WIN_SIZE_MAX]"
#endif
/*$PAGE*/
#ifndef NET_TCP_CFG_TIMEOUT_CONN_MAX_SEG_SEC
#error "NET_TCP_CFG_TIMEOUT_CONN_MAX_SEG_SEC not #define'd in 'net_cfg.h' "
#error " [MUST be >= NET_TCP_CONN_TIMEOUT_MAX_SEG_MIN_SEC]"
#error " [ && <= NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC]"
#elif ((NET_TCP_CFG_TIMEOUT_CONN_MAX_SEG_SEC < NET_TCP_CONN_TIMEOUT_MAX_SEG_MIN_SEC) || \
(NET_TCP_CFG_TIMEOUT_CONN_MAX_SEG_SEC > NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC))
#error "NET_TCP_CFG_TIMEOUT_CONN_MAX_SEG_SEC illegally #define'd in 'net_cfg.h' "
#error " [MUST be >= NET_TCP_CONN_TIMEOUT_MAX_SEG_MIN_SEC]"
#error " [ && <= NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC]"
#endif
#ifndef NET_TCP_CFG_TIMEOUT_CONN_ACK_DLY_MS
#error "NET_TCP_CFG_TIMEOUT_CONN_ACK_DLY_MS not #define'd in 'net_cfg.h' "
#error " [MUST be >= NET_TCP_ACK_DLY_TIME_MIN_MS]"
#error " [ && <= NET_TCP_ACK_DLY_TIME_MAX_MS]"
#elif ((NET_TCP_CFG_TIMEOUT_CONN_ACK_DLY_MS < NET_TCP_ACK_DLY_TIME_MIN_MS) || \
(NET_TCP_CFG_TIMEOUT_CONN_ACK_DLY_MS > NET_TCP_ACK_DLY_TIME_MAX_MS))
#error "NET_TCP_CFG_TIMEOUT_CONN_ACK_DLY_MS illegally #define'd in 'net_cfg.h' "
#error " [MUST be >= NET_TCP_ACK_DLY_TIME_MIN_MS]"
#error " [ && <= NET_TCP_ACK_DLY_TIME_MAX_MS]"
#endif
#ifndef NET_TCP_CFG_TIMEOUT_CONN_RX_Q_MS
#error "NET_TCP_CFG_TIMEOUT_CONN_RX_Q_MS not #define'd in 'net_cfg.h' "
#error " [MUST be >= NET_OS_TIMEOUT_MIN_MS]"
#error " [ && <= NET_OS_TIMEOUT_MAX_MS]"
#error " [ || == NET_TMR_TIME_INFINITE]"
#elif (((NET_TCP_CFG_TIMEOUT_CONN_RX_Q_MS < NET_OS_TIMEOUT_MIN_MS) || \
(NET_TCP_CFG_TIMEOUT_CONN_RX_Q_MS > NET_OS_TIMEOUT_MAX_MS)) && \
(NET_TCP_CFG_TIMEOUT_CONN_RX_Q_MS != NET_TMR_TIME_INFINITE))
#error "NET_TCP_CFG_TIMEOUT_CONN_RX_Q_MS illegally #define'd in 'net_cfg.h' "
#error " [MUST be >= NET_OS_TIMEOUT_MIN_MS]"
#error " [ && <= NET_OS_TIMEOUT_MAX_MS]"
#error " [ || == NET_TMR_TIME_INFINITE]"
#endif
#ifndef NET_TCP_CFG_TIMEOUT_CONN_TX_Q_MS
#error "NET_TCP_CFG_TIMEOUT_CONN_TX_Q_MS not #define'd in 'net_cfg.h' "
#error " [MUST be >= NET_OS_TIMEOUT_MIN_MS]"
#error " [ && <= NET_OS_TIMEOUT_MAX_MS]"
#error " [ || == NET_TMR_TIME_INFINITE]"
#elif (((NET_TCP_CFG_TIMEOUT_CONN_TX_Q_MS < NET_OS_TIMEOUT_MIN_MS) || \
(NET_TCP_CFG_TIMEOUT_CONN_TX_Q_MS > NET_OS_TIMEOUT_MAX_MS)) && \
(NET_TCP_CFG_TIMEOUT_CONN_TX_Q_MS != NET_TMR_TIME_INFINITE))
#error "NET_TCP_CFG_TIMEOUT_CONN_TX_Q_MS illegally #define'd in 'net_cfg.h' "
#error " [MUST be >= NET_OS_TIMEOUT_MIN_MS]"
#error " [ && <= NET_OS_TIMEOUT_MAX_MS]"
#error " [ || == NET_TMR_TIME_INFINITE]"
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* MODULE END
*
* Note(s) : (1) See 'MODULE Note #1'.
*********************************************************************************************************
*/
#endif /* End of TCP module include (see Note #1). */
Reference in New Issue View Git Blame Copy Permalink