Moyka/OS/uc/os_ii/port/os_cpu_c.c
dimoniche f74fdcceac первый коммит
первый коммит
2019-05-27 23:42:26 +03:00

524 lines
23 KiB
C
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
*********************************************************************************************************
* uC/OS-II
* The Real-Time Kernel
*
*
* (c) Copyright 1992-2007, Micrium, Weston, FL
* All Rights Reserved
*
* Generic ARM Port
*
* File : OS_CPU_C.C
* Version : V1.82
* By : Jean J. Labrosse
* Jean-Denis Hatier
*
* For : ARM7 or ARM9
* Mode : ARM or Thumb
* Toolchain : IAR's EWARM V4.11a and higher
*********************************************************************************************************
*/
#define OS_CPU_GLOBALS
#include <ucos_ii.h>
/*$PAGE*/
/*
*********************************************************************************************************
* LOCAL CONSTANTS
*
* Note(s) : 1) ARM_MODE_ARM is the CPSR bit mask for ARM Mode
* 2) ARM_MODE_THUMB is the CPSR bit mask for THUMB Mode
* 3) ARM_SVC_MODE_THUMB is the CPSR bit mask for SVC MODE + THUMB Mode
* 4) ARM_SVC_MODE_ARM is the CPSR bit mask for SVC MODE + ARM Mode
5) OS_NTASKS_FP establishes the number of tasks capable of supporting floating-point. One
* task is removed for the idle task because it doesn't do floating-point at all.
* 6) OS_FP_STORAGE_SIZE currently allocates 1024 bytes of storage in order to accomodate
* thirty-two, single precision 32 bit, or sixteen double precision 64 bit VFP registers.
*********************************************************************************************************
*/
#define ARM_MODE_ARM 0x00000000
#define ARM_MODE_THUMB 0x00000020
#define ARM_SVC_MODE_THUMB (0x00000013L + ARM_MODE_THUMB)
#define ARM_SVC_MODE_ARM (0x00000013L + ARM_MODE_ARM)
#define OS_NTASKS_FP (OS_MAX_TASKS + OS_N_SYS_TASKS - 1)
#define OS_FP_STORAGE_SIZE 128L
/*
*********************************************************************************************************
* LOCAL VARIABLES
*********************************************************************************************************
*/
#if OS_TMR_EN > 0
static INT16U OSTmrCtr;
#endif
#if OS_CPU_FPU_EN > 0
static OS_MEM *OSFPPartPtr; /* Pointer to memory partition for storing FPU registers */
static INT32U OSFPPart[OS_NTASKS_FP][OS_FP_STORAGE_SIZE / sizeof(INT32U)];
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* INITIALIZE FP SUPPORT
*
* Description: This function initializes the memory partition used to save FPU registers
* during a context switch. This function MUST be called AFTER calling
* OSInit(). OS_CPU_FPU_EN must be defined > 0 in order to compile FPU support into the
* build.
*
* Arguments : none
*
* Returns : none
*
* Note(s) : 1) Tasks that are to use FP support MUST be created with OSTaskCreateExt().
* 2) For the ARM VFP, 1024 bytes are required to save the VFP context.
* The INT32U data type is used to ensure that storage is aligned on a 32-bit boundary.
* 3) If you need to perform floating point operations from within the OSStatTaskHook(),
* then you must change the 'Options' attribute for OSTaskCreatExt() when creating
* the statistics task. This only applies if OS_TaskStat() was created with OSTaskCreateExt().
*********************************************************************************************************
*/
#if OS_CPU_FPU_EN > 0
void OS_CPU_FP_Init (void)
{
INT8U err;
#if OS_TASK_STAT_EN && OS_TASK_CREATE_EXT_EN
OS_TCB *ptcb;
void *pblk;
#endif
OSFPPartPtr = OSMemCreate(&OSFPPart[0][0], OS_NTASKS_FP, OS_FP_STORAGE_SIZE, &err);
#if OS_TASK_STAT_EN && OS_TASK_CREATE_EXT_EN /* CHANGE 'OPTIONS' for OS_TaskStat() */
ptcb = OSTCBPrioTbl[OS_TASK_STAT_PRIO];
ptcb->OSTCBOpt |= OS_TASK_OPT_SAVE_FP; /* Allow floating-point support for Statistic task */
pblk = OSMemGet(OSFPPartPtr, &err); /* Get storage for VFP registers */
if (pblk != (void *)0) { /* Did we get a memory block? */
ptcb->OSTCBExtPtr = pblk; /* Yes, Link to task's TCB */
OS_CPU_FP_Save(pblk); /* Save the VFP registers in block */
}
#endif
}
#endif
/*
*********************************************************************************************************
* OS INITIALIZATION HOOK
* (BEGINNING)
*
* Description: This function is called by OSInit() at the beginning of OSInit().
*
* Arguments : none
*
* Note(s) : 1) Interrupts should be disabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0 && OS_VERSION > 203
void OSInitHookBegin (void)
{
#if OS_TMR_EN > 0
OSTmrCtr = 0;
#endif
}
#endif
/*
*********************************************************************************************************
* OS INITIALIZATION HOOK
* (END)
*
* Description: This function is called by OSInit() at the end of OSInit().
*
* Arguments : none
*
* Note(s) : 1) Interrupts should be disabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0 && OS_VERSION > 203
void OSInitHookEnd (void)
{
#if OS_CPU_INT_DIS_MEAS_EN > 0
OS_CPU_IntDisMeasInit();
#endif
#if OS_CPU_FPU_EN > 0
OS_CPU_FP_Init(); /* Initialize support for VFP register save / restore */
#endif
}
#endif
/*
*********************************************************************************************************
* TASK CREATION HOOK
*
* Description: This function is called when a task is created.
*
* Arguments : ptcb is a pointer to the task control block of the task being created.
*
* Note(s) : 1) Interrupts are disabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0
void OSTaskCreateHook (OS_TCB *ptcb)
{
#if OS_CPU_FPU_EN > 0
INT8U err;
void *pblk;
#endif
#if OS_CPU_FPU_EN > 0
if (ptcb->OSTCBOpt & OS_TASK_OPT_SAVE_FP) { /* See if task needs FP support */
pblk = OSMemGet(OSFPPartPtr, &err); /* Yes, Get storage for VFP registers */
if (pblk != (void *)0) { /* Did we get a memory block? */
ptcb->OSTCBExtPtr = pblk; /* Yes, Link to task's TCB */
OS_CPU_FP_Save(pblk); /* Save the VFP registers in block */
}
}
#endif
#if OS_APP_HOOKS_EN > 0
App_TaskCreateHook(ptcb);
#else
(void)ptcb; /* Prevent compiler warning */
#endif
}
#endif
/*
*********************************************************************************************************
* TASK DELETION HOOK
*
* Description: This function is called when a task is deleted.
*
* Arguments : ptcb is a pointer to the task control block of the task being deleted.
*
* Note(s) : 1) Interrupts are disabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0
void OSTaskDelHook (OS_TCB *ptcb)
{
#if OS_CPU_FPU_EN > 0
if (ptcb->OSTCBOpt & OS_TASK_OPT_SAVE_FP) { /* See if task had FP support */
if (ptcb->OSTCBExtPtr != (void *)0) { /* Yes, OSTCBExtPtr must not be NULL */
OSMemPut(OSFPPartPtr, ptcb->OSTCBExtPtr); /* Return memory block to free pool */
}
}
#endif
#if OS_APP_HOOKS_EN > 0
App_TaskDelHook(ptcb);
#else
(void)ptcb; /* Prevent compiler warning */
#endif
}
#endif
/*
*********************************************************************************************************
* IDLE TASK HOOK
*
* Description: This function is called by the idle task. This hook has been added to allow you to do
* such things as STOP the CPU to conserve power.
*
* Arguments : none
*
* Note(s) : 1) Interrupts are enabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0 && OS_VERSION >= 251
void OSTaskIdleHook (void)
{
#if OS_CPU_ARM_DCC_EN > 0
OSDCC_Handler();
#endif
#if OS_APP_HOOKS_EN > 0
App_TaskIdleHook();
#endif
}
#endif
/*
*********************************************************************************************************
* STATISTIC TASK HOOK
*
* Description: This function is called every second by uC/OS-II's statistics task. This allows your
* application to add functionality to the statistics task.
*
* Arguments : none
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0
void OSTaskStatHook (void)
{
#if OS_APP_HOOKS_EN > 0
App_TaskStatHook();
#endif
}
#endif
/*
*********************************************************************************************************
* INITIALIZE A TASK'S STACK
*
* Description: This function is called by either OSTaskCreate() or OSTaskCreateExt() to initialize the
* stack frame of the task being created. This function is highly processor specific.
*
* Arguments : task is a pointer to the task code
*
* p_arg is a pointer to a user supplied data area that will be passed to the task
* when the task first executes.
*
* ptos is a pointer to the top of stack. It is assumed that 'ptos' points to
* a 'free' entry on the task stack. If OS_STK_GROWTH is set to 1 then
* 'ptos' will contain the HIGHEST valid address of the stack. Similarly, if
* OS_STK_GROWTH is set to 0, the 'ptos' will contains the LOWEST valid address
* of the stack.
*
* opt specifies options that can be used to alter the behavior of OSTaskStkInit().
* (see uCOS_II.H for OS_TASK_OPT_xxx).
*
* Returns : Always returns the location of the new top-of-stack' once the processor registers have
* been placed on the stack in the proper order.
*
* Note(s) : 1) Interrupts are enabled when your task starts executing.
* 2) All tasks run in SVC mode.
*********************************************************************************************************
*/
OS_STK *OSTaskStkInit (void (*task)(void *p_arg), void *p_arg, OS_STK *ptos, INT16U opt)
{
OS_STK *stk;
INT32U task_addr;
opt = opt; /* 'opt' is not used, prevent warning */
stk = ptos; /* Load stack pointer */
task_addr = (INT32U)task & ~1; /* Mask off lower bit in case task is thumb mode */
*(stk) = (INT32U)task_addr; /* Entry Point */
*(--stk) = (INT32U)0x14141414L; /* R14 (LR) */
*(--stk) = (INT32U)0x12121212L; /* R12 */
*(--stk) = (INT32U)0x11111111L; /* R11 */
*(--stk) = (INT32U)0x10101010L; /* R10 */
*(--stk) = (INT32U)0x09090909L; /* R9 */
*(--stk) = (INT32U)0x08080808L; /* R8 */
*(--stk) = (INT32U)0x07070707L; /* R7 */
*(--stk) = (INT32U)0x06060606L; /* R6 */
*(--stk) = (INT32U)0x05050505L; /* R5 */
*(--stk) = (INT32U)0x04040404L; /* R4 */
*(--stk) = (INT32U)0x03030303L; /* R3 */
*(--stk) = (INT32U)0x02020202L; /* R2 */
*(--stk) = (INT32U)0x01010101L; /* R1 */
*(--stk) = (INT32U)p_arg; /* R0 : argument */
if ((INT32U)task & 0x01) { /* See if task runs in Thumb or ARM mode */
*(--stk) = (INT32U)ARM_SVC_MODE_THUMB; /* CPSR (Enable both IRQ and FIQ interrupts, THUMB-mode) */
} else {
*(--stk) = (INT32U)ARM_SVC_MODE_ARM; /* CPSR (Enable both IRQ and FIQ interrupts, ARM-mode) */
}
return (stk);
}
/*
*********************************************************************************************************
* TASK SWITCH HOOK
*
* Description: This function is called when a task switch is performed. This allows you to perform other
* operations during a context switch.
*
* Arguments : none
*
* Note(s) : 1) Interrupts are disabled during this call.
* 2) It is assumed that the global pointer 'OSTCBHighRdy' points to the TCB of the task that
* will be 'switched in' (i.e. the highest priority task) and, 'OSTCBCur' points to the
* task being switched out (i.e. the preempted task).
*********************************************************************************************************
*/
#if (OS_CPU_HOOKS_EN > 0) && (OS_TASK_SW_HOOK_EN > 0)
void OSTaskSwHook (void)
{
#if OS_CPU_FPU_EN > 0
void *pblk;
#endif
#if OS_CPU_FPU_EN > 0 /* Save VFP context of preempted task */
if (OSRunning == OS_TRUE) { /* Don't save on OSStart()! */
if (OSTCBCur->OSTCBOpt & OS_TASK_OPT_SAVE_FP) { /* See if task used FP */
pblk = OSTCBCur->OSTCBExtPtr; /* Yes, Get pointer to FP storage area */
if (pblk != (void *)0) { /* Make sure we have storage */
OS_CPU_FP_Save(pblk); /* Save the VFP registers in block */
}
}
}
/* Restore VFP context of new task */
if (OSTCBHighRdy->OSTCBOpt & OS_TASK_OPT_SAVE_FP) { /* See if new task uses FP */
pblk = OSTCBHighRdy->OSTCBExtPtr; /* Yes, Get pointer to FP storage area */
if (pblk != (void *)0) { /* Make sure we have storage */
OS_CPU_FP_Restore(pblk); /* Get contents of VFP registers */
}
}
#endif
#if OS_APP_HOOKS_EN > 0
App_TaskSwHook();
#endif
}
#endif
/*
*********************************************************************************************************
* OS_TCBInit() HOOK
*
* Description: This function is called by OS_TCBInit() after setting up most of the TCB.
*
* Arguments : ptcb is a pointer to the TCB of the task being created.
*
* Note(s) : 1) Interrupts may or may not be ENABLED during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0 && OS_VERSION > 203
void OSTCBInitHook (OS_TCB *ptcb)
{
#if OS_APP_HOOKS_EN > 0
App_TCBInitHook(ptcb);
#else
(void)ptcb; /* Prevent compiler warning */
#endif
}
#endif
/*
*********************************************************************************************************
* TICK HOOK
*
* Description: This function is called every tick.
*
* Arguments : none
*
* Note(s) : 1) Interrupts may or may not be ENABLED during this call.
*********************************************************************************************************
*/
#if (OS_CPU_HOOKS_EN > 0) && (OS_TIME_TICK_HOOK_EN > 0)
void OSTimeTickHook (void)
{
#if OS_APP_HOOKS_EN > 0
App_TimeTickHook();
#endif
#if OS_TMR_EN > 0
OSTmrCtr++;
if (OSTmrCtr >= (OS_TICKS_PER_SEC / OS_TMR_CFG_TICKS_PER_SEC)) {
OSTmrCtr = 0;
OSTmrSignal();
}
#endif
#if OS_CPU_ARM_DCC_EN > 0
OSDCC_Handler();
#endif
}
#endif
/*
*********************************************************************************************************
* INTERRUPT DISABLE TIME MEASUREMENT, START
*********************************************************************************************************
*/
#if OS_CPU_INT_DIS_MEAS_EN > 0
void OS_CPU_IntDisMeasInit (void)
{
OS_CPU_IntDisMeasNestingCtr = 0;
OS_CPU_IntDisMeasCntsEnter = 0;
OS_CPU_IntDisMeasCntsExit = 0;
OS_CPU_IntDisMeasCntsMax = 0;
OS_CPU_IntDisMeasCntsDelta = 0;
OS_CPU_IntDisMeasCntsOvrhd = 0;
OS_CPU_IntDisMeasStart(); /* Measure the overhead of the functions */
OS_CPU_IntDisMeasStop();
OS_CPU_IntDisMeasCntsOvrhd = OS_CPU_IntDisMeasCntsDelta;
}
void OS_CPU_IntDisMeasStart (void)
{
OS_CPU_IntDisMeasNestingCtr++;
if (OS_CPU_IntDisMeasNestingCtr == 1) { /* Only measure at the first nested level */
OS_CPU_IntDisMeasCntsEnter = OS_CPU_IntDisMeasTmrRd();
}
}
void OS_CPU_IntDisMeasStop (void)
{
OS_CPU_IntDisMeasNestingCtr--; /* Decrement nesting ctr */
if (OS_CPU_IntDisMeasNestingCtr == 0) {
OS_CPU_IntDisMeasCntsExit = OS_CPU_IntDisMeasTmrRd();
OS_CPU_IntDisMeasCntsDelta = OS_CPU_IntDisMeasCntsExit - OS_CPU_IntDisMeasCntsEnter;
if (OS_CPU_IntDisMeasCntsDelta > OS_CPU_IntDisMeasCntsOvrhd) { /* Ensure overhead < delta */
OS_CPU_IntDisMeasCntsDelta -= OS_CPU_IntDisMeasCntsOvrhd;
} else {
OS_CPU_IntDisMeasCntsDelta = OS_CPU_IntDisMeasCntsOvrhd;
}
if (OS_CPU_IntDisMeasCntsDelta > OS_CPU_IntDisMeasCntsMax) { /* Track MAXIMUM */
OS_CPU_IntDisMeasCntsMax = OS_CPU_IntDisMeasCntsDelta;
}
}
}
#endif
/*
*********************************************************************************************************
* INITIALIZE EXCEPTION VECTORS
*
* Description : This function initialize exception vectors to the default handlers.
*
* Arguments : None.
*********************************************************************************************************
*/
void OS_CPU_InitExceptVect (void)
{
/*
(*(INT32U *)OS_CPU_ARM_EXCEPT_RESET_VECT_ADDR) = OS_CPU_ARM_INSTR_JUMP_TO_HANDLER;
(*(INT32U *)OS_CPU_ARM_EXCEPT_RESET_HANDLER_ADDR) = (INT32U)OS_CPU_ARM_ExceptResetHndlr;
*/
(*(INT32U *)OS_CPU_ARM_EXCEPT_UNDEF_INSTR_VECT_ADDR) = OS_CPU_ARM_INSTR_JUMP_TO_HANDLER;
(*(INT32U *)OS_CPU_ARM_EXCEPT_UNDEF_INSTR_HANDLER_ADDR) = (INT32U)OS_CPU_ARM_ExceptUndefInstrHndlr;
(*(INT32U *)OS_CPU_ARM_EXCEPT_SWI_VECT_ADDR) = OS_CPU_ARM_INSTR_JUMP_TO_HANDLER;
(*(INT32U *)OS_CPU_ARM_EXCEPT_SWI_HANDLER_ADDR) = (INT32U)OS_CPU_ARM_ExceptSwiHndlr;
(*(INT32U *)OS_CPU_ARM_EXCEPT_PREFETCH_ABORT_VECT_ADDR) = OS_CPU_ARM_INSTR_JUMP_TO_HANDLER;
(*(INT32U *)OS_CPU_ARM_EXCEPT_PREFETCH_ABORT_HANDLER_ADDR) = (INT32U)OS_CPU_ARM_ExceptPrefetchAbortHndlr;
(*(INT32U *)OS_CPU_ARM_EXCEPT_DATA_ABORT_VECT_ADDR) = OS_CPU_ARM_INSTR_JUMP_TO_HANDLER;
(*(INT32U *)OS_CPU_ARM_EXCEPT_DATA_ABORT_HANDLER_ADDR) = (INT32U)OS_CPU_ARM_ExceptDataAbortHndlr;
(*(INT32U *)OS_CPU_ARM_EXCEPT_ADDR_ABORT_VECT_ADDR) = OS_CPU_ARM_INSTR_JUMP_TO_HANDLER;
(*(INT32U *)OS_CPU_ARM_EXCEPT_ADDR_ABORT_HANDLER_ADDR) = (INT32U)OS_CPU_ARM_ExceptAddrAbortHndlr;
(*(INT32U *)OS_CPU_ARM_EXCEPT_IRQ_VECT_ADDR) = OS_CPU_ARM_INSTR_JUMP_TO_HANDLER;
(*(INT32U *)OS_CPU_ARM_EXCEPT_IRQ_HANDLER_ADDR) = (INT32U)OS_CPU_ARM_ExceptIrqHndlr;
(*(INT32U *)OS_CPU_ARM_EXCEPT_FIQ_VECT_ADDR) = OS_CPU_ARM_INSTR_JUMP_TO_HANDLER;
(*(INT32U *)OS_CPU_ARM_EXCEPT_FIQ_HANDLER_ADDR) = (INT32U)OS_CPU_ARM_ExceptFiqHndlr;
}